Jump to content
SAU Community

New Garrett Gtx2860R / 2863R / 2867R


Gav

Recommended Posts

They spec the normal GTX2863 for 2000 bucks including the normal 3"/2" compressor housing for 2000 bucks, so an extra 200 bucks for a gtr style compressor housing machined out to fit doesn't seem that bad to me...

Link to comment
Share on other sites

anyone have any thoughts on the response difference running GTX2863s on a 2.6 instead of a 2.8?

im trying to gauge how the'd go on mine after seeing the dyno plots on a 2.8. im guessing a similar difference between the -5 and GTX plots just moved slightly up the rpm scale?

Link to comment
Share on other sites

Why bother....OK apart from Legality (which aftermarket turbos still dont cover you for).....

how did I know that video was what was in the link.

old tech twins vs new tech billet single

should have used a GT3582 from an XR6 turbo. that would have been a better comparison since the compressor wheels are all of similar design and the only variable would have been twin vs single.

What if he had used newer gtx2863 vs older gt3582 single?

I posted this in the comments of the video but I'm still awaiting a reply

Link to comment
Share on other sites

To be fair, he is correct in that he's comparing two common setups. Not many are running around with GTX2863's still.

but it not about comparing "common" setups it was all about "low twins vs single".

his single setup uses a 50mm ex gate which looks to be to atmosphere, plus his 3.5" exhaust which helps with the response mid topend power.

he should have plumbed the gate back in before the cat. to make it a fair fight.

Not siding either way as I'm after a stock appearance myself.

Edited by mr skidz
Link to comment
Share on other sites

but it not about comparing "common" setups it was all about "low twins vs single".

his single setup uses a 50mm ex gate which looks to be to atmosphere, plus his 3.5" exhaust which helps with the response mid topend power.

he should have plumbed the gate back in before the cat. to make it a fair fight.

Not siding either way as I'm after a stock appearance myself.

+1 for stock appearance
Link to comment
Share on other sites

That video is a good summary of my feeling going from twins to the 6262

He seems to have epic power from -9s though or a slightly happy dyno?

-7 housings with -5 wheels I believe, Pete.
Link to comment
Share on other sites

^yeah, that's why I'm super keen to see a pair of GTX2860's in -7 housings. I'm curious how hard they'll go in the .42 compressor covers.

Also worth noting is the stock head work and tomei poncams with only 9.1mm lift!

Link to comment
Share on other sites

how did I know that video was what was in the link.

old tech twins vs new tech billet single

should have used a GT3582 from an XR6 turbo. that would have been a better comparison since the compressor wheels are all of similar design and the only variable would have been twin vs single.

What if he had used newer gtx2863 vs older gt3582 single?

I posted this in the comments of the video but I'm still awaiting a reply

GTX2863 are not bolt on. He says in the opening lines what the comparison is and goes through all the pros and cons.

Haven't most of the graphs of gtx turbos proven they don't spool quicker but they make more power?

So using an older gt style 3582 would just not make as much top end

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...