Microtech Air Temp Sensor Where Do I Wire It?

[DriftSquad]

It's a plug n play rb25 microtech?

[luvpsi]

i drilled a small hole in the crossover pipe just before the TB and tapped it and put the sensor in there however i didnt wire it in so im not sure where its wired to on the ecu

[R31Nismoid]

Yeah as close to the T/B as possible, i think that's the question hehe.

[DriftSquad]

Sorry should have said. I mean what to wire it to cuz its a plug n play ecu?

[blind_elk]

The instruction manual should be able to tell you which pins are for the air temp sensor. Then just lay some wire to suit.

[DriftSquad]

I don't have a manual. All the plugs are taken up by the plug n play lume so I'd imagine it would be in the standard lume some where?

[luvpsi]

Nah it's part of the plug and play adaptor download a manual from microtech

[DriftSquad]

Would it be 2 of the wires from the afm lume?

[DriftSquad]

Would it be 2 of the wires from the afm lume?

[luvpsi]

Don't know off top of my head just download a manual like I said from microtech you will need it later on in the life of the microtech trust me

[blind_elk]

I don't have a manual. All the plugs are taken up by the plug n play lume so I'd imagine it would be in the standard lume some where?

But not all the pins.

(And it's "loom")

[DriftSquad]

I tryed Looking for the plug n play one but had no luck.. I found the lt-12s normal one

[luvpsi]

That's the one you will need