Jump to content
SAU Community

Where Do You Buy Sports Shoes / Gear?


DivHunter
 Share

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

those vibram five finger shoes are pretty light, definately wasnt them was it?

Some people are starting to wear them in my gym, dont know weather or not they will catch on. What is annoying me though is members taking their shoes off to squat/deadlift, not just at the power rack but even with a 20kilo bar in the free weights area. I know there may be some minor benefits but no need for it. .... sorry going off track, just needed to vent :-) might start a new thread on it.

Link to comment
Share on other sites

I used to take my shoes off to squat/dead, now I just wear free runs.

I would've laughed in the face of anyone that told me to put them back on.

I dont see how it could possibly affect u so focus on your own workout and stop worrying about what everyone else is doing

Link to comment
Share on other sites

those vibram five finger shoes are pretty light, definately wasnt them was it?

Some people are starting to wear them in my gym, dont know weather or not they will catch on. What is annoying me though is members taking their shoes off to squat/deadlift, not just at the power rack but even with a 20kilo bar in the free weights area. I know there may be some minor benefits but no need for it. .... sorry going off track, just needed to vent :-) might start a new thread on it.

Your supposed to deadlift in no shoes mate.

Here are some approved deadlifting shoes

http://www.titansupport.com/products/deadlift-slippers-men-s.html

But some people wear converse all stars.

Basicaly you want flat hard surface under your foot

Link to comment
Share on other sites

i understand there may be some benefits associated with no shoes, however, i dont feel it necessary in your everyday fitness first gym etc. people have been deadlifting with shoes on for years! if its good enough for ronnie then its good enough for you:

http://www.youtube.com/results?search_query=ronnie+coleman+deadlift+800+lbs&oq=ronnie+coleman+dea&aq=1&aqi=g8&aql=&gs_nf=1&gs_l=youtube.1.1.0l8.735.4549.0.7072.18.18.0.5.5.0.387.1780.7j2j3j1.13.0.

*hope that link works* just incase it dont, its ronnie doin his 800 pound deadlift...... IN SHOES! *GASP HORROR*

gtst - you are correct a lot of em wearing the converse all stars and a blank no name brand as well.

dezz, put it this way, freeweights area, flat bench, dumbell press, 130 kilo overweight patrons walking around with no shoes on with toe jam..... sorry but there has to be some level of hygiene, or are you one of those customers that i have to address not placing a towel on equipment :-)

Do you know how expensive it is to get the equipment reupholstered, not cheap! plus the down time of the equipment can also make it annoying for patrons as well.

Link to comment
Share on other sites

Ronnie frequently trains in WORK BOOTS.

Have a look at the video again.

those boots are not jogger/sneakers.

anyway, I get your point.

If training at a fatness first you need a towel and shoes and latest micro fibre training gear and flouro shoes which cost hundreds of dollars and leather weight lifting gloves while doing DB flyes using 8kg bright coloured rubber coated DBs while listening to One Directions latest hit blasting across the gym, in between trying to get a glimps of your tanned self in the hundreds of mirrors and pretending that you're not.

Link to comment
Share on other sites

  • 2 weeks later...

For those still interested in online shops after all the ranting etc.

http://runningwarehouse.com/ and

http://www.wiggle.co.uk/

are my favourites by far. 2 pairs delivered for cheaper than 1 at the local.

And yes I am aware of the offshore stores taking local money etc etc, but I can't justify the cost of runners in town when I don't make a huge deal of money myself. Spending half a paycheck on a pair of shoes I'll wear out in a couple hundred km's is f**ked.

Link to comment
Share on other sites

I used to wear cheap flat sole sneakers (Vans) which work for squats/deads as the soles are flat and thin. Cheap $5 Chinese shoes / kung fu shoes would be really good for people other than me (my feet are too big)

I'm not sure if anyone does plyometrics but, if you have a crack definately go some strength shoes/ jump soles for plyometrics or a cross trainer that has bulk cushioning for the ball of the foot/toe area.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...