34 Fmic Install

[Josh...]

Ok I'm shit and tried searching but can't find much....... Can anyone shoot me a link for a decent install thread ?

[Eps]

Here is a thread with details about them not particularly a guide on installing them. I'm sure you have probably seen it, but it can't hurt linking it again as it is good.

http://www.skylinesaustralia.com/forums/Summary-Front-Mount-Inte-t190267.html

[Aggroman]

its simple if you get a kit made for your car (if not you need to make brackets which is easier than you think).. remove front bar.. take off old pipes/cooler, put on new stuff and shave front bar to clear the cooler..

[Josh...]

My new pipe work does have the feed to the power steering pump ? How do I remedy said dilemma ?

[Bsa]

It shouldn't go anywhere near the pump sure you have the piping the right way

[Josh...]

On the stock pipes there is a hose that goes from the xover to the power steering ........ Nowhere on new pipe work to put it

[scotty nm35]

If thats the case you need a brass nipple tapped into the pipe, where are you located? I would just weld a bit of flat to the pipe and tap it 1/8 bspt.

[Josh...]

Located in dubbo :-( dads damn good with a welder so I'll talk to him this Arvo :-)

[Josh...]

What does the line to the ps pump actually do ?

[zebra]

firms up the steering at higher engine loads (i.e going faster)

Well on my Toyota's it does, I would assume the Nissans are the same

[Josh...]

Sooooooooo :-) if I want to be really impatient I could do without it for a few days till I can get it welded on ^_^

[zebra]

Don't see why not, it is just a solenoid,

I would block it off with a little bolt or something to be safe

[Josh...]

Sweet means I can get it on now then :-)