Jump to content
SAU Community

Who On Sau Is The Fastest...?

R31Nismoid

By R31Nismoid,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Nur33 Mentor

Nur33

Posted
Posted

How many of these car's actually drive to the track under there own steam and not on a trailer + how many of them change there tires once they get to the track.... a true street car should be able to rock up to the track, do a few passes, then drive home simple as that.

blk180 Veteran

blk180

Posted
Posted

That Yellow Corolla used to when it was running 8s, not sure now that it has the wheelie bars. Also his 7.97 was run on 275 Dot aprroved tyres.

Event points.

h) 400 metre sprint Each crew will score points towards their nominated forum based on their fastest lap for the event to the following scale

1.25. Fastest outright-40 points

1.26. Fastest 4WD 20 points

1.27. Fastest- RWD 20 points

1.28. Fastest- FWD 20 points

I was trying to point out what can happen if dot approved tyres and rego are the only rules, anyways mite have to make a weekend of it and drive down. Are all event going to be open to

spectators Ash? get my go SAU banners and Pom poms.lol

Thanks Brad

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

It's an ARC round Brad = 100% spectator driven.

In fact the more ticket that sell under the "SAU" banner, more points we receive.

More details to come on that in a few weeks, so hold off for now. But it will be an awesome event. I've been in contact with some rather special cars :thumbsup:

2rismo Grand Master

2rismo

Posted
Posted

Again - On DOT Approved Radials.

Both those cars are tubbed on slicks :rolleyes:

Mark Hayes' Torana is a baby hydraulic cammed 496ci that'd be lucky to run a 10. Scott Hoffman's OKE020 is registered and runs 7's on radials but isn't together. BU5TER is a roller with no engine (when it comes back the new owner is looking for 7's, no rego and on big f**king slicks). Surely something running low-10's/high-9's from SAU would shit this in?!

Nur33 Mentor

Nur33

Posted
Posted

We are hoping to run a mid to high 9sec pass on the 19inch Advan AD08's on our next outing, will not be putting17inch M/T's tyres on until we have can absolutely cannot get any more improvement on the Advans at this point in time the car is still under testing and is getting faster and faster with every run. Can't wait to head back out to the track and crack a 9sec pass.

  • 3 weeks later...
R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

Well the entry list is now upto 4 cars for the 400m dash

AND...

NO MORE STREET REGO

I've dropped a PM to superjet, however he has not been online in over a month. If someone knows him personally and could give him quick call and point him in his PM box direction it would be great!

As the rules have changed, anyone with some non-rego'd cars around??? I reckon there would be a few interested people now especially given we need a team of FOUR!!!

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

HUGE NEWS!!!

superjet760 looks like making the trip to Melbourne, to fly the SAU flag in the 400m

8.9 sec pass on DOT radials - Perhaps even faster.

Will have 100% confirmation in approx 2 weeks, and pending no more setup issues (or unfortunate failures) - this is a GO!

This is some excellent awesome news. Still need 2 more cars at this stage.

Spread the word - Team SAU is taking brilliant shape already.

  • 2 months later...
WHITER33GTS-T Veteran

WHITER33GTS-T

Posted
Posted

im not caged or teched but im happy to go out on radials with my gtr... still a stock 5 spd at the moment but the T400 shouldnt be too far away... (been saying this since may but apparently everything is ready to go)

mine makes around 1050 at the wheels at the moment but if i race it ill prob throw another 5 pounds in it.

if not, im ready to hire out WSID for a private day and do some testing if anyone is keen shoot me a message.

I heard this made 1300hp with the auto :worship:

  • 3 months later...
GodzillaMotorsport Enthusiast

GodzillaMotorsport

Posted
Posted

1300hp at the wheels. Should run 7.4 .. We make 1200 hp all 4 wheels to run 7.6 at 180 plus mph .

We ran 8.69 on my drag radials .. Liberty trans .. 9.0 with ppg .. Auto is similar to a clutch less box .. Very easy to drive prob nos of the trans brake also ..

If we continued on the drag radials a 7.9 sec pass would be possible but grip level would be questionable !!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...