Jump to content
SAU Community

Recommended Posts

My understanding is screamers:

  • are illegal
  • cannot be engineered
  • incur a $15,000 fine if they bypass the cat converter

Plumb them in and you wont need to worry about it. There is also a law that says any road exhaust pipe needs to end after the rear axle, but that wouldnt carry a big fine as long as it went through a cat.

To find out the fine ask for what the fine will be if your vehicle does not have a cat and is required to, as this is what they will book you for.

The only time screamers sound good is over 6000rpm, all other times they sound like a leaky exhaust and/or a fart, I was a idiot and got one when I first got my exhaust done a couple of years ago, I drove home from the shop and when I got home rang them back up to get it plumbed back in.

For a street car its not worth the hassle, fines and general annoyance, also you lose a lot of the induction sound because it is overpowered buy the vomitous exhaust noise.

I prefer the sound of the induction at 24lb than the sound of a noisy exhaust anyway.

My understanding is screamers:

  • are illegal
  • cannot be engineered
  • incur a $15,000 fine if they bypass the cat converter

Plumb them in and you wont need to worry about it. There is also a law that says any road exhaust pipe needs to end after the rear axle, but that wouldnt carry a big fine as long as it went through a cat.

To find out the fine ask for what the fine will be if your vehicle does not have a cat and is required to, as this is what they will book you for.

Isnt It something like 12inches from last opening door/window etc. That only what i have ben told. I have never checked it

You're going to find out soon enough.

Make sure you post back and let us know exactly how many thousand it is.

Haha love it. Officer would be licking his lips if he caught you.

Edited by Al Despo

In the city couple years ago, just when they started going hard on the EPA stuff.

I actually copped one $80 fine for the two pages of defects.

And a couple hundred for the noise level, but nothing for the screamer and lack of cat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From my bolts, standard M8 with 1.25mm thread pitch (M8x1.25mm).    Length is 19mm under the head and has a captive 18mm OD flat washer.   20mm length from a bolt shop is what you'll be able to get.   Make sure they're zinc plated.    If you're concerned about strength, grade 8.8 will be more than enough. Original PN is 01121-04971.  Now discontinued according to Amayama but that's because it's one of the parts that's been captured by the Heritage program, which explains the ridiculous price.   New PN is 01121-RHR20: https://nismodirect.com/nismo-heritage-bolt-pin-hinge-hood-bnr32-nissan-skyline-gt-r-01121-rhr20-01121-04971/ About AUD33 converted from Yen in the above link but that's just one example. Interesting that the hinge-to-body bolts are still available non-heritage.....PN 08116-8161G around $2 each (amayama).    Same thread but 16mm long.
    • Well, if that filter was impeding fluid flow, then it could have similar effects to faulty solenoids. The TCU will register a fault when it does something (ie, changes the state of a solenoid) and does not detect the required result. If there are other causes that can make the same lack of result, then they will be indistinguishable to the expected cause for which the TCU has a code.
    • Yellowjackets, red ones, blue ones (other than Splitfire) have all been demonstrated to be unreliable on turbo engines. That unreliability can be anything from outright failure (ie, 4 out of a set of 6 working out of the box) to just not being strong enough for the task, on a boosted engine. Not enough of us care about NA engines to know whether that unreliability is an issue for the undemanding needs of an NA RB20. I should think though that the DIS-008 should fit the 20. There's not really any reason for the head/coil mounting area to be any different on those 2 Neos. I wouldn't be buying Splitfires, or any other old tech coilpack, for a car in this day and age though. I would buy modern pencil coils and do what needs to be done to adapt them to the loom. That's relatively trivial these days, with numerous kits for fitting R35, or Audi, or Yaris/Corolla coils.
    • Keen to see how much work is needed to get an abandoned Skyline going. My R32 has been sitting idle for three years or so but finally got some time to get it going again. (Also lurking SAU and trying to hit 10 posts so I can start my own intro thread with pics)
    • Hi. Which coilpacks can i use in my engine? I looked at the Splitfire but the closest "match" i found was SP-DIS-008 but even that they do not show RB20DE NEO so iam not 100% sure. Or maybe different one which will 100% work? I saw many on ebay but they are some cheap "strange" ones. What about Yellow Jackets? Many thanks 🙂 
×
×
  • Create New...