Jump to content
SAU Community

Recommended Posts

Hi guys, this may sound super noob but would like to find our anyway. Would like to add a boost controller on the car n would like to know if the boost hi n low will be dyno tuned? Another question is, doing controller then front mount intercooler a good way to go? Thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/385276-noob-r33-gtst-s1-question/
Share on other sites

stock r33 ecus cant be tuned and when adding high boost it will go into rich and retard and will not give u proper boost.either a remapped ecu or nistune are the cheaper options but u will also need aftermarket coil packs and regapped spark plugs for better performance.the list goes on.do a search u will find all ur answers there or go and see a reputable tuner

stock r33 ecus cant be tuned and when adding high boost it will go into rich and retard and will not give u proper boost.either a remapped ecu or nistune are the cheaper options but u will also need aftermarket coil packs and regapped spark plugs for better performance.the list goes on.do a search u will find all ur answers there or go and see a reputable tuner

that makes it sound a bit worse than it is. you can easily run 11 or 12psi safely without any issues and you will see noticable gains without needing a tune.

that makes it sound a bit worse than it is. you can easily run 11 or 12psi safely without any issues and you will see noticable gains without needing a tune.

have u seen wat happens wen u do it on a dyno?or road tune?

have u seen wat happens wen u do it on a dyno?or road tune?

yup. had my 33 running the stock ecu with a front mount cooler, cat back and running about 12psi (and the timing advanced a few degrees) and it made just over 200kw at the wheels (204kw to be exact) on a dyno and AFRs weren't that rich (no richer than at lower boost levels). a mate made 177kw from his 33 at similar boost on the same dyno, but his engine was a bit worn and it had a remapped ecu (was in the car when he bought it, so no idea what it was tuned for).

oh and i forgot to say, you only need aftermarket coils and plugs if the stock ones are cactus. my mates 33 that made 177kw, i installed a larger turbo on it and tuned the ecu he got for it and it made 250kw with the stock coils and copper spark plugs gapped at 0.8mm

yup. had my 33 running the stock ecu with a front mount cooler, cat back and running about 12psi (and the timing advanced a few degrees) and it made just over 200kw at the wheels (204kw to be exact) on a dyno and AFRs weren't that rich (no richer than at lower boost levels). a mate made 177kw from his 33 at similar boost on the same dyno, but his engine was a bit worn and it had a remapped ecu (was in the car when he bought it, so no idea what it was tuned for).

oh and i forgot to say, you only need aftermarket coils and plugs if the stock ones are cactus. my mates 33 that made 177kw, i installed a larger turbo on it and tuned the ecu he got for it and it made 250kw with the stock coils and copper spark plugs gapped at 0.8mm

thats interesting cause i asked my tuner if i could rum 11psi boost with a stock ecu,3.5" exhaust,r34 smic (im now running a fmic) and stock turbo and he said it it would go into rnr and that there are no real gains to be made.

the 204kw u made in ur r33 was it a safe tune so to speak its not goin to blow ur motor or turbo in the near future?

thats interesting cause i asked my tuner if i could rum 11psi boost with a stock ecu,3.5" exhaust,r34 smic (im now running a fmic) and stock turbo and he said it it would go into rnr and that there are no real gains to be made.

the 204kw u made in ur r33 was it a safe tune so to speak its not goin to blow ur motor or turbo in the near future?

11psi shouldn't put the car into rnr, however every car is different. most cars don't hit it until up around 13psi. this is also the limit of what is safe to run on the stock turbo without drastically shortening it's life. this is well documented on this forum. plenty of people will tell you that the stock turbo stops making power at around 12 or 13psi, but that is totally wrong. this is generally said by people who have never tried it and have simply read it on a forum (written by other people who have never tried it and simply read it on a forum too) and they take it as gospel. but i digress.

the 204kw i made in my 33 was on the stock ecu, so it was as safe as any stock ecu (safer than most aftermarket tunes). the AFR's were in the mid 10's at high rpm, so plenty of head room if it started to lean out. it was on the verge of hitting rnr though as there were 2 slight dips on the graph. i'd had to back the boost down by about 1psi on the way to the dyno as it had hit rnr. as for blowing the motor, the stock motor is safe at 200kw. the general concensus is that 300kw is the upper limit of the stock motor (you can make more power than that on the stock motor but it won't last long). it was the upper limit of what's safe for the stock turbo though. having said that i got a hold of a remapped ecu without rnr and was running 14/15psi for about a year with no problems. never had it on the dyno with that ecu (had checked the AFR's with a mates wideband though and they were safe). definitely had more power though. one day i wound the boost back down to 11psi and put the stock ecu back in and it felt much slower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • 2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
×
×
  • Create New...