Jump to content
SAU Community

Exhaust Manifold Turbo Studs

OG.R34

By OG.R34,
in Engines & Forced Induction

 Share

Recommended Posts

OG.R34 Apprentice

OG.R34

Posted
Posted

Hi Guys.

Im after a bit of help in sourcing some 60mm (approx.) studs and nuts for my turbo manifold.

Basically have been told that the standard studs for the turbo flange are not long enough as my 35/40 has a spacer plate for clearance off engine and the nuts on it currently cant get a full lock.

Any ideas where I may be able to source some high tensile and also heat resistant studs from to suit the T3 flange.

Any help much appreciated.

Link to comment
Share on other sites
AngryRB Grand Master

AngryRB

Posted
Posted

Im doing a similar thing, but fitting a gtx3076 and i got some studs from a local nuts and bolts shop, heaps around

Have you checked if your manifold is warped? cause mine is and will have to be machined, thought i should mention it in case you put yours on and its leaking.

Link to comment
Share on other sites
OG.R34 Apprentice

OG.R34

Posted
  • Author
Posted

Thanks for replies.

What is MTQ?

Also im kinda chasing specific shop names or "nuts and bolts" places who do the special studs to cope with the heat etc.

It seems lazy and well I guess it kind of is :) Dont play with cars much anymore just drive them

Link to comment
Share on other sites
tricstar Mentor

tricstar

Posted
Posted

going through the same thing as we speak,

Just spoke to a guy, Brad from Atomic performance 02 86655889 they have what you need...

MTQ don't have anything special, just standard bolts with a squash locking nut.. if its a pretty standard setup and doesn't see lots of heat should be ok tho.. otherwise try Atomic

Link to comment
Share on other sites
tricstar Mentor

tricstar

Posted
Posted (edited)

The ones I got from MTQ are high tensile, highly heat resistant.

high tensile has nothing to do with heat resistance.

but like I said, if its not a track car and doesn't see prolonged crazy high temps they will be fine..:thumbsup:

Edited by tricstar
Link to comment
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

high tensile has nothing to do with heat resistance.

but like I said, if its not a track car and doesn't see prolonged crazy high temps they will be fine..:thumbsup:

+1

If you are changing them, you'd probably go the inconel ones regardless.

They are a bit more expensive but they will last the distance. It's not something you wanna do twice that's for sure

Link to comment
Share on other sites
tricstar Mentor

tricstar

Posted
Posted

+1

If you are changing them, you'd probably go the inconel ones regardless.

They are a bit more expensive but they will last the distance. It's not something you wanna do twice that's for sure

I've just spent half an hour on google, with no joy, any idea where to get inconel bolts in australia ??

Link to comment
Share on other sites
OG.R34 Apprentice

OG.R34

Posted
  • Author
Posted

Thanks heaps for the info guys just wondering if anyone has got the studs of approx 60mm length?

Im just going off what I hae been told does this seem correct length im assuming factory is 40mm so makes sense.

Link to comment
Share on other sites
aerofocker Enthusiast

aerofocker

Posted
Posted (edited)

Im looking for inconel bolts and lock nuts for my own 3071 spacer set up,iirc the studs need to be about 50 - 60 mm and the thread pitch is m10 x 1.5 I cannot seem to locate the studs anywhere, pm me if you know where I can source the studs as im tired of tightening the existing arp studs about once every few months

thanks in advance

Edited by aerofocker
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Calling all audiophiles

      By Dose Pipe Sutututu · Posted

      Surprisingly the D6000 is only $1999, I'm waiting for the BF/CM sales, and hoping to get one cheaper. D4000 is well priced, still outperforms the 13" SVS PB-3000 and is like 1/2 the price at $1699 RRP. I do watch a fair amount of movies, and listen to EDM, jazz, symphonies, etc. so the lower notes from a subwoofer are always appreciated. The front 8" stage, just doesn't provide you with lively feeling, even though they are pretty bassy for a pair of large bookshelves. Then again, these days it's just playing Wiggles, Blippi and Ms Rachel, another reason the 3m wide cabinet exists, to hide all the audio gear behind it. They used to sit on a nice pair of stands, but as you know, they make good baby traps too.
    • GTSBoy
      Calling all audiophiles

      By GTSBoy · Posted

      Granted, which is a solid reason why I don't have one. My floorstanders are only -2 dB at 22 Hz.  So they're still working down to <20 Hz. Which is no doubt part of the reason why my receiver shits the bed! That Tonewinner would be about double the cost though, so it's not apples and apples. There aren't many AU$1300 subs (that you can buy prebuilt, I'm ignoring what can be achieved by DIYing) that compete.
    • Dose Pipe Sutututu
      Calling all audiophiles

      By Dose Pipe Sutututu · Posted

      -6dB at 22Hz isn't that great, watch the data from the D6000 from REW
    • GTSBoy
      Calling all audiophiles

      By GTSBoy · Posted

      I'll just leave this here. https://www.adelaidespeakers.com/subwoofers.html TL loading, big power. They sound awesome. This is what I would buy if I was going to try to take the bass away from my floorstanders. Just go with the 12".
    • Dose Pipe Sutututu
      Calling all audiophiles

      By Dose Pipe Sutututu · Posted

      I'll snap up some photos when I'm back home, in the office today meeting my "in the office" quota. Have 2x Teams calls scheduled in, office culture they reckon.   I've never owned a proper off the shelf sub, I've always made or modified broken ones with Jaycar plate amps and/or car subwoofer drivers. The current (and broken) subwoofer has a proper home driver in it, Dayton driver, thos one https://www.daytonaudio.com/product/118/rss265hf-4-10-reference-hf-subwoofer-4-ohm FS of 25Hz, which is low but not low enough. Yeah, I think they were brought out to the market to compete with SVS. I would love a SVS PB-3000 but they're not cheap, especially after their price hike. From reviews online, it does look like the Tonewinner D6000 would destroy and with good amount of money saved too.
×
×
  • Create New...