Jump to content
SAU Community

Weds On A R33

Savtraxx
 Share

Recommended Posts

GTSBoy Grand Master

GTSBoy

Posted
Posted

A 10" wide wheel at +46 offset will effectively become something like +36 offset once the 4-5 stud adaptors are installed, and will push the wheels out a fair way. It'll be a tight squeeze.

Why don't you look at the thread I pointed you to (it's the topmost sticky thread) to see what wheel sizes and offsets people have managed to fit? It's a huge database for you to study.

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151657
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

Also depends on whether the back of the wheel is flat or has indentations to allow for the excess from the factory wheel studs to go through. Otherwise the adapters will need to be 25-30mm long meaning the wheels would effectively become 18x10 +16! That is crazy to run on the front of a 2wd R33. The back could work but not the fronts IMO. You are talking GT-R wheel specs not GTS/GTS-T wheel specs.

Buy + Sell = Profit

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151766
Share on other sites
75coupe Grand Master

75coupe

Posted
Posted

you will not fit the front rims... no way, I barely fitted 9" wide on the front... and the rears will be tight as...

I reckon your wasting your time, let me guess you bought em cause they look cool...

oh wait a sec your on an NA r33... why bother with 10" you'll have to much grip with 7" rims and 215s

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151820
Share on other sites
Captain Natro Grand Master

Captain Natro

Posted
Posted

hey man, not a hope of fitting them under the front gayrds, with 8 inch +45s and a 5mm spacer my fronts a flush with 235s. but yer check the database uo the top of this thread :)

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152430
Share on other sites
045HOW Mentor

045HOW

Posted
Posted (edited)

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

Take a joke buddy. My car can lift the skin off custard, you jelly?

OT: Just sell them man, unless you want some sort of Hellaflush situation going down and the homo police called.

Edited by 045HOW
Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152497
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

hey man, not a hope of fitting them under the front gayrds, with 8 inch +45s and a 5mm spacer my fronts a flush with 235s. but yer check the database uo the top of this thread :)

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

:huh:

I have seen 18x9.5 +30 and similar on the front of an R33 GTS-T before...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152806
Share on other sites
75coupe Grand Master

75coupe

Posted
Posted

the op is buying rims cheap, and is asking people if they will fit, do you really think he wants to pay to now make them fit, Im guessing the labour involved will be outside his budget...

10s on the front of an NA r33 +46 with 4to5 stud spacer, yeah they'll fit if you have the money and the time...

these must be an old model wed cause the new ones dont come in +46...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152865
Share on other sites
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

:huh:

I have seen 18x9.5 +30 and similar on the front of an R33 GTS-T before...

18x9.5+30 is nothing for a 33 front guard.

without excess camber i am running 18x9.5+12 with 235's and it's low

it's an easy fit. a few guys are running an inch wider than that too... but you really need to camber them in a fair bit

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6153965
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...