Jump to content
SAU Community

Recommended Posts

Whats wrong with this state ?

MASSIVE increases in speeding fines, driver's licence costs and water fees will kick in from July 1.

While costs for public transport tickets and motor vehicle registration charges will increase only modestly, those caught exceeding the speed limit will be whacked with fines up to 28.6 per cent higher.

Drivers exceeding the speed limit by less than 15km/h will now pay a $252 fine, up from $196.

A breach of 15-30km/h will attract a $371 fine, up from $312, while fines for those travelling more than 40km/h above the speed limit will be $523, up from $468.

Treasurer Jack Snelling said he was comfortable with drivers who broke the law being further penalised, while denying it was simply a revenue-raising measure.

"No one would be happier than me to not raise a single cent from fines from speeding drivers," he said.

"Road accidents cost millions and millions and millions per year.

"I'm quite comfortable with these measures."

Driver's licence renewal fees will jump from $140 to $185 for a five-year term - a 32.1 per cent increase - with the same increase, to $370 from $280, for a 10-year licence.

Mr Snelling said this increase was a result of last year's Budget and there was not the financial breathing room to unwind it.

The average residential water bill will increase by 40.3 per cent, from $469.60 to $658.70, to pay for the Government's desalination plant. Treasurer Jack Snelling has already indicated consumers can expect a similar increase in the following year also.

Motor vehicle registration fees would increase by between 3.9 and 4.3 per cent while the standard compulsory third-party premium would increase by 2.7 per cent.

For a four-cylinder car, this would mean an increase in annual fees from $578 to $595 - a 2.9 per cent rise overall.

Single-trip tickets for public transport would increase 2.2 per cent to $4.70 while peak-time multi-trip tickets would increase 3 per cent to $30.90.

"The annual indexation factor for fees and charges has been set at 2.9 per cent for 2011-12, reflecting the average increase in the cost of providing the relevant services," Government budget documents say.

The motor vehicle fee increases are about 1 per cent above this indexation factor to fund a four-year program of road resurfacing and rehabilitation works for rural roads.

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Treasurer Jack Snelling said he was comfortable with drivers who broke the law being further penalised, while denying it was simply a revenue-raising measure.

what a miserable lying c**t

Yeah its pretty much a hunt for more money

its the point to point speed cameras which they are going to install around Adelaide next year which totally suck

Are point to point cameras used in other cities yet rant.gif

im assuming you mean average speed cameras. they use them a lot in the UK especially through road works

I cant see it working if you have traffic lights ,

im guessing only on uninhibited flowing roads , lets say roads through parklands between Greenhill rd and south terrace .

can anyone clarify ?

well if the northern expressway extensions onto south road (for example) were happening in the uk there would be a speed camera from when you entered the 40kph zone and one at every set of lights so if you averaged more than 40 youd get done

but they could put them at any traffic lights so that if you sped between two sets of lights, even if you slowed down to go through the intersection then you would still get done

well if the northern expressway extensions onto south road (for example) were happening in the uk there would be a speed camera from when you entered the 40kph zone and one at every set of lights so if you averaged more than 40 youd get done

Those cameras you speak of are already mounted on Port Wakefield road's northern half...

-D

Highest taxed state, highest rego costs, highest speeding fines (even before the increases were brought in), all under the guise of "saaaaaaving lives". This is all Treasury's decision..not road safety. Not one police member attended the meeting when this was voted in.

Those cameras you speak of are already mounted on Port Wakefield road's northern half...

-D

But I was told they are only for trucks/log books at this time.

If they didnt increase the fines then they would most probably increase smokes and beer. So we cant win ever.

Yes there are a few cameras on port wakefield rd. You could hold it down and just before the end pull over for 5 min and then it looks like you were going below average speed.

If they didnt increase the fines then they would most probably increase smokes and beer. So we cant win ever.

Yes there are a few cameras on port wakefield rd. You could hold it down and just before the end pull over for 5 min and then it looks like you were going below average speed.

Yeah we could.

Stop the wankers from giving themselves 31% pay rises. I only got a 3% rise last year based upon the cost of living index, so f**k the pollies.

Oh, and stop them from spending money taking their children overseas... and building shit like tram extensions...

Heres a thought.... spend some money on fixing our roads... how hard would that be?

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...