Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

lol woops knock the 1 of the front of that

lol

you mean the zero off the end..

origial ones were $22 to start with.

now gen 2 is $40 delivered

but if your one comes connected to an RB26 then fair enough. :D

you mean the zero off the end..

origial ones were $22 to start with.

now gen 2 is $40 delivered

but if your one comes connected to an RB26 then fair enough. :D

fark it

i'll just throw it at the next door neibours dog instead

lol

Pm sent re engine, haven't seen any cash yet

first in with full amount wins it

Injectors sold pending payment

plenty still left including roll cage, Blitz fibreglass bonnet, Wilwood brakes, intake kit, whole registerable shell, fuel pump and surge tank, gauges and more!!

Update of items still for sale, some prices reduced PLUS new pics added:

Rb26dett rebuilt long motor – Deposit taken

Wilwood 4 piston Superlight front brakes with Brembo 324mm drilled discs $1,300 Now $1,200

Includes three brand new sets of spare pads, bracket adapter kit and braided lines. Rotors and pads have plenty of meat left on them.

IMG_1050.jpg

R32 Gtr N1 turbos $1,000

R32 Gtr Garrett -5 turbos, done approx 15,000km $1,500

Wiring loom for R32 Gtst Rb26dett conversion $200

Intercooler 600x400x100mm and piping to suit Gtst $300

IMG_1103.jpg

Stock Rb26 BOVs and piping (BOV return pipe already sold) $200

Intake kit including copy Greddy pipe to intercooler, twin pod filters $400 $350

IMG_1024-1.jpg

5Zigen 3”stainless steel turbo back exhaust $250

IMG_1000.jpg

OBX manifolds $250

IMG_1056.jpg

Stock Rb26 front pipes $150

Stock Rb26 exhaust manifolds and dump pipes $40 each

Intank Gtst fuel pump $100

Fuel pressure regulator $100

IMG_1023-1.jpg

Fuel cooler $40

IMG_0955.jpg

Oil catch can 1L $50

IMG_1020.jpg

Turbotech manual boost controller $10

Bolt in 4 point roll cage $500

IMG_1008.jpg

Blitz R32 Gtr fibreglass bonnet $650 $600

Top condition with N1 lip and aero catches

IMG_0994.jpg

R32 Gtr rear wing $150

Has a couple of chips but otherwise good condition

IMG_1109.jpg

17 x 8 rims, no rubber $500 (see pics below)

4 Door 1993 R32 Gtst shell

IMG_0993-1.jpg

Non rolling, previously registered in Vic, suit track use $1000 or $1500 with bolt in roll cage. Shell is mostly stripped out except for dash and steering column. Does not include wheels, suspension, brakes, bonnet, wing, headlights. PM me for more details.

Stagea rear calipers and rotors $150 $100

Greddy strut brace front $150 $130

IMG_1058.jpg

Custom strut brace rear $120 $100

Nismo control link set, suits Gtst $500

IMG_10522.jpg

R32 passenger seat, good condition $100 $60

IMG_1010-1.jpg

SAAS Steering wheel (no boss kit) $100

SAAS gear knob $50

Tomei 300km dash $350

IMG_1143.jpg

IMG_1145.jpg

M's turbo timer $50

IMG_1142.jpg

Apexi 2” Power Meter gauge $80

IMG_0984.jpg

Apexi Multichecker (Engine check system) $300

New in box with certificate of authenticity, manual etc

IMG_0939.jpg

Speco meter tacho 2.5” $60

IMG_0983.jpg

Sold stuff:

Rb26 standard turbos rebuilt with steel wheels

R32 Gtr Power FC with hand controller

HKS split dump pipes

OBX tuned length front pipe

Walbro 305LPH external fuel pump and 4L surge tank incl braided lines and Speedflow fittings

Yellow jacket coil packs

Oil filter relocation kit and 30-row cooler, with Speedflow fittings

ASI 52mm dual core alloy radiator, Blitz cap, JC-project silicone pipes

MDU Gtst suspension

Bride drivers seat with super low rail

R34 Gtt factory steering wheel

Autometer Sport-comp 2.5" boost gauge

EBCR 2” exhaust gas temperature gauge

AEM wideband sensor gauge kit

Short shifter kit, brand new in box

550cc Siemen Denso Injectors, new O-rings, seals

Fark!

Typo above... exhaust is $200 cat back as the front pipe is already sold

Mate have you still got the wiring loom? I am putting a 26 in my R32 at the moment. I assume this will fit a 2 door OK? Best price for it delivered to 4174 and I'll take it off your hands this week.

Kirk 0414 236 724

Hey man. I'm keen on the exhaust but not sure if I can transport it. Would it be possible to get it shipped to Goulburn, 2580? OR I'd be willing to pay someone to bring it down. I need to get rid of the dirty exhaust that came with my car.

Mate have you still got the wiring loom? I am putting a 26 in my R32 at the moment. I assume this will fit a 2 door OK? Best price for it delivered to 4174 and I'll take it off your hands this week.

Kirk 0414 236 724

the loom with the head is sold

i have another loom you can have for 150+ shipping this out of a r32 but you will have to modify it

Hey man. I'm keen on the exhaust but not sure if I can transport it. Would it be possible to get it shipped to Goulburn, 2580? OR I'd be willing to pay someone to bring it down. I need to get rid of the dirty exhaust that came with my car.

can ship but i'll need to get a quote.... probably be around $100 maybe??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...