Sensor Clamp

[Sleepy_R34]

Hey guys,

I recently got myself an EGT gauge and im just having trouble deciding how to mount my sensor, im not comfortable messing around with my manifold, so i decided to sacrifice some accuracy and put the sensor on my dump pipe.

The dump pipe wall is too thing to drill and tap a hole to simply screw the sensor in, so i would need to weld a bung onto it and mount it that way, except i don't have a welder.

I have seen another way which might solve me problem, by using a clamp such as the one below

or as pictured in this manual: http://www.autometer...n/2650-1088.pdf (right at the bottom)

But i'm having trouble finding these clamps, i have found the one pictured on ebay, but none of them are big enough to clamp over the 3" pipe, does anyone have any idea where i can get these?

Edited December 16, 2011 by Sleepy_R34

[Bsa]

where are you located i can put a bung in for you.

[Sleepy_R34]

Im live on the northside of brisbane, send me a pm, would be great if you could help, or anyone else in the area, it should really just be a 2 minute job, i'll remove the dump pipe so that its a straight forward job.