Jump to content
SAU Community

S14 / S15 Parts Inc: Xtreme 6 Puck Clutch Kit, Ca/rb Ngks, Hybrid Intercooler, K&n Panel Filter, Used Oem Mounts


Recommended Posts

Located in Southern Suburbs of SA.

Pickup preferred but will post if necessary.

No low-ballers please but willing to consider somewhat reasonable offers.

Reason for sale is because I have since upgraded and no longer require the current parts:

Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO

Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April.

The entire kit is being sold including:

  • Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw)
  • Lightweight moly flywheel (single-mass, less weight than the dual-mass)
  • Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?)
  • Xtreme Pressure plate
  • Fork pivot ball

The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out.

The part number for it is: TB40017

Part is only about $50 direct fomr ACS in Wingfield, SA

Link:

http://www.australia...sp?parentid=118

Picture attached of clutch and pressure plate:

wp000152.jpg

wp000155h.jpg

throwout.jpg

PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps!

Great for decent power gains required on a budget without much pressure drop.

Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core.

Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core.

If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK!

hybridfmic.jpg

S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO

Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy.

knfilter.jpg

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one.

2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so?

mount1j.jpgmount2v.jpg

mount3q.jpg

8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO

sparkplugs.jpg

Will post some items if they don't sell locally except for the intercooler.

In regards to contacting, please PM me and we can go from there.

Cheers.

Edited by Ruff Ryda

NOTE: Fork pivot ball above is included, it won't be sold as a seperate item so please disregard the listing where it mentions it's for sale at $30 ONO.

  • 1 month later...

Bump.

NOTE: Clutch is XTD, the fly and pressure plate is Xtreme.

Any offers?

Edited by Ruff Ryda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • C34 Stagea RS4S Standard RB25DET Neo with ARP Headstuds and MLSR Gasket. Bosch 1000cc injectors Walbro 460 Standard neo inlet plenum w/rb25 s2 throttle body 6 Boost Low Mount Manifold Turbosmart Gen V 45mm wastegate (recirculated) Pulsar g30-770 (0.72 rear housing) 3.5"intake pipe to clear mounts, 3.5" dump to 3" exhaust Link G4X Ecu 380 hp on 98 octane, 478 HP on e85 (mainline hub dyno) Video of Earlier Run VID_300701109_043404_458.mp4 Final Dyno Sheet:    
    • Meh. Every single gear in my gearbox will crunch. I've been treating it nicely for >12 years now.
    • How fast are you doing the downshift? 4th gear was revised multiple times until 1998 to fix this issue. Synchro clips can fall out, synchros can wear. Most likely you're looking at a new transmission unfortunately. If you need to limp it until then double clutch downshifts into 4th.
    • Sorry I was being harsh there, but am I wrong? You can buy a M340i easily, and there's loads available second hand. A lot more workshops modifying them as well. How about getting parts for them? Don't get me wrong, I'd love a 400R, even a 4cyl (I looked at a few V36s before buying my shitbox BMW). Sadly Infiniti died in Aus and we're stuck with importing them as niche vehicles. Supply and demand
    • Probably straight swap for an R32 GT-R? lol
×
×
  • Create New...