Jump to content
SAU Community

Recommended Posts

Pickup's from Runcorn/South Brisbane-can drop them off locally

All serious offer's will be considered

-17x10+15 lenso D1R rims in VGC

Sprayed gloss black-can add two 80% 235-45-17 Federal 595's for extra $$$

$430 ono

-Pair VGC 17x8 +38 Lenso D1R rims-both look almost new

Just fitted with near new 225/45/17 Federal 595 tyres-will sell rims seperatly

$500 ono

-3xRAYS Gram Light's T57RG 17x8+43

Two rims are near new/no gutter rash or damage at all-fitted with 60% 215/45/17 Nankang tyres-both abit camber worn

Other rim rim is allgood except for a bit of light rash on edge

$300 ono

-Pair of WORK Meister 17x8 +40 S2R's

One rim has a bit of gutter rash in a section on outside edge-no biggie-other rim doesn't

Both Bridgestone Potenza REO5OA 225/45/17 tyres are about 60% now

Still on my r33-rims sit inside stock rear gaurds

$300 ono

-Pair DMAX 17x8 5 spoke rims

Sprayed black-no gutter rash

One rim has very slight flatspot

$130 ono

-Random 17x8+38 white mesh rims-no rash or damage-good skidders

$80 ono

-Stock s15 16x6.5 wheels in VGC-original silver paint

Only on rim has section of light gutter rash-rest are allgood

All tyres are 205-55-16 so good for AWD cars too

Two tyres are almost new-two are at least 50%

$470 ono

post-59075-0-30782500-1324481906_thumb.jpg post-59075-0-74918900-1324481916_thumb.jpg post-59075-0-78250600-1324481923_thumb.jpg

post-59075-0-56846900-1324482036_thumb.jpg post-59075-0-97671700-1324482051_thumb.jpg post-59075-0-74337000-1324482081_thumb.jpg

post-59075-0-22320700-1324482089_thumb.jpg post-59075-0-64627300-1324482112_thumb.jpg post-59075-0-30375500-1324482120_thumb.jpg

post-59075-0-68241100-1324482180_thumb.jpg post-59075-0-14503500-1324482193_thumb.jpg post-59075-0-27046800-1324482204_thumb.jpg

post-59075-0-56280700-1324482226_thumb.jpg post-59075-0-89694000-1324482248_thumb.jpg post-59075-0-40035800-1324482259_thumb.jpg

post-59075-0-24753800-1324482267_thumb.jpg

Also have these-there not going to fit my s14 without major camber adjustment's...

-Near mint 18x10+22 Lenso D1R rims-silver spokes 30mm chrome dish

Fitted with about 70% 225/40/18 tyres-bit camber worn

Can in include pair of brand new 235/45/18 Gemstone's for extra cash

$530 ono

post-59075-0-27053400-1324902401_thumb.jpg post-59075-0-87741200-1324902413_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was once told, who it was I'm to old to remember, that the length of the OEM wheels brace supplied with a vehicle is designed long enough for a average person to apply enough torque to do up, and undo the wheel nuts to the specified torque  What a average person is is anyone's guess though, i.e. average fat bastard, average knuckle head, average perfect sized human......like me Unless of course, a tyre shop has ugga dugga'd them up to "torque to yeild/strip" specs, used cross threading as natures lock tight, or a big breaker bar was used to tighten them up to get some nice stretch in the poor old wheel studs Me, I torque wheel nuts to 1 elbow joint click, lower torque settings are based of wrist clicks, higher torque settings are based of shoulder clunks, or total dislocation for anything that requires all of the torques 
    • I think the catch can design is pretty flawed. Evident in the fact that the V2 one moved to a larger top mounted filter which alone would have helped with overflow and reduce restrictions compared with the side filter. I also imagine there was a major improvement to the baffling design. It is worth mentioning that this catch can with the RB20 was never as much of an issue and the high kms RB25 is likely a part of the problem. I have gotten quotes for both a new "Vibrant Gen 3" catch can and to modify this existing ones but that may have to wait until after the track day. I hope the sump/head breathers/drains and cam splash plates will be enough
    • Yep, both. The ratio is 1.8 instead of OEM being 1.7. The rocker bodies are modified with a larger bolt hole and re-threaded with 10mm holes instead of the 8mm YT has stock. Finding out they don't actually fit the stock castings cause a lot of un-impressment by the person in the USA who tapped the new holes for the 'upgraded' YT product. He was very unhappy with them given their previous design did not require 'clearancing'
    • That too, but I think this is why she's put the work into the cam cover baffles. I mean, a catch can should only need to be a catch can, not an oil air separator also. Not to say that putting the effort into having it do a better job of oil-air sep is a waste of time, but doing the sep earlier is always going to make life better. And that should happen now anyway.
    • I think both. Higher ratio and more stout. I think at least part of his lift increase came from the rocker.
×
×
  • Create New...