Jump to content
SAU Community

Recommended Posts

post-85004-0-53234900-1324699305_thumb.jpgpost-85004-0-53234900-1324699305_thumb.jpghey guys i am selling a fully built motor it was just finished as of yesterday from a very reputable engine builder.. i have ran out of cash to finish this project properly and to do anythin less would be a shame cause of its potential and the gear i have bought for it... i will post photos and the specs of this engine but it was built from the base of a 32 gtr rb26dett i will also be selling a PAR Straight Cut Dog box i have the specs on this box if interested i am after $6200 for the gearbox once again just finished the other day never been put in a car... i have a twin plate direct clutch for sale also brand new a t88 with a t51 wheel it in not sure on exact specs but ill also get those as there was big money spent on it to get it to respond the way it does.. i have a haltech platinum pro computer also new a billet intake pump with twin walbro 1000hp pump a Zeitronix ZT-3 wide band kit, Turbosmart fpr2000 with gauge...all these items are new and will be selling

Here are the specs of the motor and what was done to it

JE PISTONS DAT/NIS SKLN RB26DETT

MACHINE HEAD CAM CLEARACE

NISSAN RB26DETT TIMING BELT

ARP HEAD STUD KIT NISSAN RB26DETT

ARP Main stud kit

VRS SET NISSAN RB26DETT

GRIND 6 CYL CRANKSHAFT/ FIT COLLAR

BALANCE 6 CYL ENGINE

TUNNEL BORE 6 CYL BLOCK

BORE & HONE 6 CYL BLOCK

DECK 6 CYL BLOCK trail square

set tappets /shims

supply and fit oil pump collar

full port and flow cyl head

bronze guides

Carrillo CONROD NISSAN RB26 HJ-BEAM

CONV SET NISSAN RB26DETT

SUPERTECH VALVEGUIDE

SUPERTECH VALVE GUIDE

SUPERTECH DUAL VALVE SPRING KIT

SUPERTECH NISSAN RB26DET

SUPERTECH NISSAN RB26 EX VALVE

SUPERTECH VALVE LOCK NISS RB26

NITTO PUMP 1400

HI OCTANE SUMP EXTENSION .695

FAB OIL PAN

SHIMS x 24

STD NIISSAN RB30 CONROD BRG SET

STD RB26DETT INLINE 6 DOHC 4V TURB

Will be sad to see this go but dont have the money to finish this project properly

$14500 asking price for the motor anyone who has built one and knows these parts knows how much it costs to build one to handle over 1000hp

post-85004-0-29634300-1324699340_thumb.jpg

post-85004-0-68893300-1324699365_thumb.jpg

post-85004-0-16565900-1324699389_thumb.jpg

post-85004-0-60168500-1324699417_thumb.jpg

post-85004-0-70828700-1324699437_thumb.jpg

post-85004-0-55091900-1324699455_thumb.jpg

post-85004-0-26647200-1324699479_thumb.jpg

post-85004-0-07871400-1324699594_thumb.jpg

post-85004-0-98079200-1324699622_thumb.jpg

post-85004-0-67367800-1324699664_thumb.jpg

post-85004-0-84896200-1324699693_thumb.jpg

post-85004-0-28534400-1324699718_thumb.jpg

post-85004-0-01787700-1324699774_thumb.jpg

post-85004-0-76259500-1324699819_thumb.jpg

post-85004-0-22037700-1324699849_thumb.jpg

post-85004-0-57749100-1324699870_thumb.jpg

post-85004-0-68959500-1324699885_thumb.jpg

post-85004-0-43278900-1324699899_thumb.jpg

post-85004-0-61216900-1324699915_thumb.jpg

post-85004-0-19231100-1324699927_thumb.jpg

post-85004-0-80040700-1324699941_thumb.jpg

post-85004-0-85695400-1324699950_thumb.jpg

post-85004-0-50094500-1324699964_thumb.jpg

Edited by gtr_23qu
Link to comment
https://www.sau.com.au/forums/topic/386465-fully-built-engine/
Share on other sites

i wouldnt buy a par box to use as a paperweight, but the engine looks the goods mang, why not just hang onto it and come back to it at a later date?

Cause i didn't quite think of all the lil parts that was needed and they were the killer...to do anythin less with this engine would be a waste it was built big a strong to handle alot but the old story of the cash flow is a big factor in this unfortunately oh yea it has HKS Cams 264 aswell but gotta check

hi mate,

how much for the haltech platinam pro and does it come with loom.

i need it for my r33 gtst.

thanks

post-85004-0-53234900-1324699305_thumb.jpgpost-85004-0-53234900-1324699305_thumb.jpghey guys i am selling a fully built motor it was just finished as of yesterday from a very reputable engine builder.. i have ran out of cash to finish this project properly and to do anythin less would be a shame cause of its potential and the gear i have bought for it... i will post photos and the specs of this engine but it was built from the base of a 32 gtr rb26dett i will also be selling a PAR Straight Cut Dog box i have the specs on this box if interested i am after $6200 for the gearbox once again just finished the other day never been put in a car... i have a twin plate direct clutch for sale also brand new a t88 with a t51 wheel it in not sure on exact specs but ill also get those as there was big money spent on it to get it to respond the way it does.. i have a haltech platinum pro computer also new a billet intake pump with twin walbro 1000hp pump a Zeitronix ZT-3 wide band kit, Turbosmart fpr2000 with gauge...all these items are new and will be selling

Here are the specs of the motor and what was done to it

JE PISTONS DAT/NIS SKLN RB26DETT

MACHINE HEAD CAM CLEARACE

NISSAN RB26DETT TIMING BELT

ARP HEAD STUD KIT NISSAN RB26DETT

ARP Main stud kit

VRS SET NISSAN RB26DETT

GRIND 6 CYL CRANKSHAFT/ FIT COLLAR

BALANCE 6 CYL ENGINE

TUNNEL BORE 6 CYL BLOCK

BORE & HONE 6 CYL BLOCK

DECK 6 CYL BLOCK trail square

set tappets /shims

supply and fit oil pump collar

full port and flow cyl head

bronze guides

Carrillo CONROD NISSAN RB26 HJ-BEAM

CONV SET NISSAN RB26DETT

SUPERTECH VALVEGUIDE

SUPERTECH VALVE GUIDE

SUPERTECH DUAL VALVE SPRING KIT

SUPERTECH NISSAN RB26DET

SUPERTECH NISSAN RB26 EX VALVE

SUPERTECH VALVE LOCK NISS RB26

NITTO PUMP 1400

HI OCTANE SUMP EXTENSION .695

FAB OIL PAN

SHIMS x 24

STD NIISSAN RB30 CONROD BRG SET

STD RB26DETT INLINE 6 DOHC 4V TURB

Will be sad to see this go but dont have the money to finish this project properly

$14500 asking price for the motor anyone who has built one and knows these parts knows how much it costs to build one to handle over 1000hp

at what stage is this, ie is the head bolted on, does it have cams and the covers on etc.

if not does it have a head gasket and what is the comp ratio set at if the standard head gasket was to be used.

location ?

Pm sent

at what stage is this, ie is the head bolted on, does it have cams and the covers on etc.

if not does it have a head gasket and what is the comp ratio set at if the standard head gasket was to be used.

location ?

Pm Sent

  • 2 weeks later...
  • 1 month later...
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Standard GTRs are boring and there plenty of them, do what ever you want to it and just remember nothing about them is cheap anymore and if you’re picky about how you want things done it gets even worse.    if it’s an n1 or something very limited then maybe care more about it’s heritage 
    • Alright guys, I've got good odds the motor survives due to a majority of spare parts. Who's taking bets on clutch, who's on transmission, and who's go diff? Happy to also take bets on if it still overheats in traffic or not 😛     Car looks amazing by the way. I've never been a fan of R34 rears, so really, I don't think any body kit etc solves that for myself, but the front end looks amazing!
    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
×
×
  • Create New...