Jump to content
SAU Community

Recommended Posts

Hello all, Happy Christmas Eve etc

I am looking at buying some second hand coilovers (JIC Magic) from an S14 (For the front of my R31).

I understand the basic things to check such as leaking seals, dints or scratches on the piston of the shock, worn rubbers, strut tops etc

But I was hoping someone would be able to suggest some other things to check? Or good methods for checking coilovers before buying - what else should I be looking for?

Any help or tips would be great

Many thanks,

Anthony.

Once the spring is removed though? With springs in the coilovers i'd only be able to push down maybe 10mm. I've asked the guy to remove one of the camber tops so I can push the piston all the way down and see how well it returns.

I usually test with springs still in, you will notice whether it's dead as it won't spring back up normally. I think sydneykid did a thread about buying second hand suspension and what to look for. Have a search for it if u can

Can someone fill me in or help me with some info, I cant find anywhere about adjustable suspension laws, do you need a engineers report or something riveted to your fire wall? or can you just put em in yourself and its legal as long as your 100mm off the ground. i dont want my car more illegal than it already is and Vic police are pretty strict confused.gif

Also Im pretty sure you can get adjustable's rebuilt? if you got a bargain price and one needed a new seal or something i dont think it costs to much. could always be an option but it is a hassle I guess

I usually test with springs still in, you will notice whether it's dead as it won't spring back up normally. I think sydneykid did a thread about buying second hand suspension and what to look for. Have a search for it if u can

The rears were quite high up, so there was a gap from the top of the spring to the spring seat, allowing me to compress the shock around 50mm. One of them did not return at all, just sat there. Walked away, new suspension on order!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...