Jump to content
SAU Community

Recommended Posts

On the street none of our R33's leak fuel from the fuel caps but whenever we go to a Texi or Wakefield Park we have fuel spilling out of the cap.

We have tried three different caps to no avail and we only run the car with about half a tank of fuel when it is on the track so it is not over filled. On the street you can fill the tank to the point where you can see fuel just inside the cap and it never leaks. Whenever you open the fuel cap there is never any pressure build up issues so we are running out of things to try.

Where to from here - what are other people doing to stop this annoying problem? Are there specific caps that seal better for use in motorsport situations?

the cap should seal up so you get the pressure build up, so if you have tried different caps and still not getting the pressure build up and it's leaking then it may be the filler neck that is the issue. this has been covered many times over the years. generally with people getting a fuel smell. it is something to do with when they compliance them.

Thanks for the advice guys - I have one of the filler necks that has not had a compliance restrictor installed so if I use that one then this problem should no longer exist and I can refuel the car quicker with the larger filler opening.

yeah, that is another bonus. My race car was never complied so no bloody restrictor. I don't think they are required now days as leaded fuel is long forgotten

Now the problem is people putting unleaded in diesels... Lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For me at least the reason why it bothers me is because it's indicative of a deeper problem. And that will nag at me forever. Especially because I have tailpipe emissions testing + evap leak testing every 2 years.
    • WELP. I went to the track, and I suppose it went okay because any time you can drive home is okay. You may notice the car is not on the circuit in this picture. It was about 35C day out in Benalla which means the track was approximately the surface of the sun, probably. Good things, car did not overheat but it _was_ warmer than when I had done track days in similar heat before, I think, I'm not sure - I can't quite remember. Coolant got to ~105 via the ECU after 20-30 minutes of belting it in said heat. Oil got up to 145C in one instance which is pretty crazy due to oil cooler. Pressures were fine. I seem to remember this not getting quite so high before the vents. More HMMMM'ing to be done. On the subject of HMMM'ing, can anyone identify the sounds in the video below, you will know which ones I mean: https://www.youtube.com/watch?v=uj3BkI2cbTc I included some 'normal' sound as a reference for the first minute or so. The microphone in this instance was where the license plate is. It stopped working later in the day which is why my "best example of a lap video (not produced)" had internal audio - Isn't hearable from inside the car. I don't mean the chirping of the un-bedded/badly bedded track brakes which you can only hear while braking... Thoughts, brains trust?
    • blame old mate Hawkins for that one  I remember way back in the day the japanese didn't want them either... they always assumed a race shell would be thrashed. We found a few when looking for an R34 GTR for the Whites to drive in Targa Tas back in 2002.
    • I know it's probably not going to cause any major engine issues. I just had a more generic concern that it's technically not running right (I guess this means the rpm is not sitting where it technically should be) Though the other thing is, it's that my steering wheel is shaking at 1,100 rpm at idle until it gets warm (seemed to happen after I tightened my alternator belt, will be testing the alternator soon).
    • I mean, what's the concern here? Higher fuel consumption? FWIW my idle sits at around 800rpm or so as well. And yes, it runs fine, idles fine and there are no issues as far as I can tell. I don't quite see the problem.
×
×
  • Create New...