Jump to content
SAU Community

R33 S1 Partout. Complete Engine Package Minus Turbo, Fmic, Tomei Bms, Interior, Doors, Headlight, Tail Lights, Exhaust, Mdu Coilovers & More


Recommended Posts

hey guys, parting out my r33 s1. will get pics of items up tomorrow!! or sms 0416 129 811 for pics

complete standard rb25det package minus turbo from a s1 r33.

purchased as low km import engine and installed by justjap on 11/12/09 (2 years ago) and has since put 31,000km on the engine. I also have the purchase and install receipt from justjap.

includes throttle body, intake manifold, injectors, rail, reg, complete running motor with accessories; alternator, exhaust manifold, coilpacks and ignitor, loom and standard ECU with heavy duty clutch ( unsure of what the clutch is, i havnt split the box and engine yet )

Engine runs fine with no issues, blows no smoke.

$850!! this has been for sale for 6+ months and i havn't had much interest so just want it gone

tomei brake master cylinder stopper

$60

HPI jap brand intercooler kit with complete piping ( hot pipe and cold pipe, from turbo to throttle body ) scilicon joiners and clamps suit r33. (possibly other r chassis?). core size 600x300x75, tube and fin. used for less then 3,000km.

$400

r33 s1 dash, excellent condition. no cracks

$80

r33 s1 dash cluster, displaying 211,xxx km. fully functional, no faults.

$60

r33 dash, air vent & din surround

$40

digital climate control unit

$80

passenger side door skin

$30

driver side door skin

$30

driver side window control, fully functional. all buttons work perfectly

$40

passenger side window control, fully functional. all buttons work perfectly

$30

passenger side door complete, with window, motor, loom, door handle etc only missing the door skin

$90

driver side door complete, with window, motor, loom, door handle etc only missing the door skin

$90

left + right side oem electric mirrors

$60

r33 rear subframe with traction & camber arms, hicas rack with toe arms and ends all still attached. No diff and no lca's

$150

front crossmember with steering rack & tie rods and ends still attached ( ends in good condition, with unripped boots) , ps pump and all lines also attached.

$180

oem front castor rods with recently replaced bushes

$50

front castor rod brackets, straight, has taken no hits

$40

RHS headlight, good condition. no cracks, no mounting tabs broken. a little yellow, could use a rub over with some toothpaste.

$60

driver side front guarder guard, small dint at very top of wheel arch

$60

oem amber side indicators

$30

oem clutch master & slave, hardline and damper all still connected.

$90

R32 bm44 brake master cylinder ( this was the unit i purchased as an upgrade for my 180 but using the 33 master and booster now so selling the 32 master )

$80

r33 turbo manual lsd, shimmed up. locks very nice, not over shimmed. non ABS

$150

r33 s1 oem front floor mats

$40

r33 rear parcel shelf with 6x9's

$50

passenger + driver sun visors

$25

rear view mirror

$10

r33 carpet, no rips etc

$30

fuel tank

$60

boot with slight dint in the top

$30

passenger side tail light

$30

driver side tail light

$30

bonnet

$60

3" catback, chopped out mid muffler with xforce cannon

$80

oem dump + front pipe with oem gutted cat

$50

front hubs + knuckles complete. does NOT include LCA's

$60

rear monkey brace

$60

MDU coilovers, spring height adjustable. no knocks or leaks

$300

ALL located in wollongong. will post up more items tomorrow, and pics of items as well.

contact by pm or Nik on 0416 129 811.

Edited by nik.

are these still available

driver side window control, fully functional. all buttons work perfectly

$40

driver side door skin

$30

r33 turbo manual lsd, shimmed up. locks very nice, not over shimmed. non ABS

$150

r33 s1 oem front floor mats

$40

r33 rear parcel shelf with 6x9's

$50

Do u have the blinker relay under the dash with plug?

yes it would be there, not sure which one it is tho?

What color?

maroon

If black do you have front bar and reo both uncut?

front bar yes, has abit cut out to fit fmic. reo unfortunately not, previous owner cut most of it away to fit a fmic

Do you have the radiator (stock), air-con condenser, thermo fan (w/shroud)?

radiator yes, selling for $40, air-con condenser i should, left it at a mates house so ill check he still has it. sold the fan & shroud already

are these still available

driver side window control, fully functional. all buttons work perfectly

$40

driver side door skin

$30

r33 turbo manual lsd, shimmed up. locks very nice, not over shimmed. non ABS

$150

r33 s1 oem front floor mats

$40

r33 rear parcel shelf with 6x9's

$50

yes, they are all still available

Engine gone??

nope still have the engine

How much for the box without the enigne

sorry mate, box unavailable as its attached to my 180 :)

What's condition of the coilovers? Can I get pics of them please and how was the quality on the street?

sorry guys net has been capped and im having trouble uploading. will get pics of the coils and the catback asap.

its a small yellow box not much bigger then a match box from memory i think the plug has only 3 wires going into it. Its near the transmition tunnel. if your able to turn the car on flick your blinker and you will hear it click. Sorry about the not to clear instructions im overseas for at the moment and trying to remember off the top of my head. It you have it how much would it be for the box, plug and say 5cm of wiring out of the plug?

Looking for the bracket that connects the sway bar to the swing arm, need the right one but would take both if you have them please.

Looking for the bracket that connects the sway bar to the swing arm, need the right one but would take both if you have them please.

sorry mate only looking to sell complete with the sway bar

Still got cat back??

yea sure do.

sorry to everyone, im having trouble uploading pics, it would make it alot easier if you sms me for them or send me an email and ill send you pics of requested items.

its a small yellow box not much bigger then a match box from memory i think the plug has only 3 wires going into it. Its near the transmition tunnel. if your able to turn the car on flick your blinker and you will hear it click. Sorry about the not to clear instructions im overseas for at the moment and trying to remember off the top of my head. It you have it how much would it be for the box, plug and say 5cm of wiring out of the plug?

car is unpowered so cant listen for it, but i will have a look and get back to you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...