Jump to content
SAU Community

Recommended Posts

I replaced the alternator on our R33 today because the battery light was coming on at idle.

I installed a Bosch item that was recommended as a replacement. It all fit OK, and it's a 14V 85A unit, compared with the (12V?)80A old one.

The warning light at idle was gone

Mrs drove it to work, it still starts and drives OK, but now whenever the car is OFF the batt warning light comes on, and remains on,

Any ideas??

Thanks,

Sam

Link to comment
https://www.sau.com.au/forums/topic/386751-new-alternator-battery-light/
Share on other sites

Aaaaaaaaaand here's the awesome development that has me really hating the car frown.png

Forgot to disconnect battery last night, battery light was still on this morning

Jump started the car..

Didn't sound like it was too happy idling, I hopped in the driver's seat:

Speedo going all over the place, was at 100kph idling, I gave the throttle a tap and it jumped off the top of the scale

Stereo flickering on and off as though there's a short somewhere

that's all i noticed before I turned it off to hopefully avoid doing too much damage to stuff.

I have no idea how to even approach this, which is the really awesome thing.

In other news, when I unplug the 2pin on the back of the alternator (with the car off) the battery light goes away. Internal fault for sure??? What would have happened if SOMEHOW the little conversion plug they give you was wired backwards? At the moment it goes

[sKYLINE HARNESS-------BOSCH ALT]

light green-----------------------black

white----------------------------red

which I don't know but seems weird to me

I have fitted these before to skylines, and the plug as always been correct. I would check all the fuses 1st, As on the other side off the dash globe should be an ignition to stop this from happening. Im a mobile auto electricain in brisbane if you need help mate.

Edited by mr031

I have fitted these before to skylines, and the plug as always been correct. I would check all the fuses 1st, As on the other side off the dash globe should be an ignition to stop this from happening. Im a mobile auto electricain in brisbane if you need help mate.

Thanks, I'll check it out.

Your callout fee to Townsville might be huge though. :)

well it seems the reason the reg is f**ked is because it was the wrong one. Amazing. Thanks very much Bosch :(

getting it back (repaired/replaced) tonight, will throw it in and hope the rest of the system is all ok.. otherwise off to the auto elec tomorrow for further warranty fixes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man that dinner was such a long time ago....2010! I would only replace the rubber coolant lines with silicone these days; cheap, readily available and will last for ever. You will need new hose clamps though eg https://justjap.com/products/cooling-pro-silicone-engine-heater-hose-set-black-nissan-r32-gtr-rb26dett
    • I wouldn't look too hard at what they did with the R32 GTR in endurance racing in Australia... Lots of things weren't actually available from the factory in the way those cars ran them... Japan also followed what Fred Gibson was doing here with some of there endurance cars in Japan... Australia is also the reason for things like the Brembo brakes, and the change in the gearbox... And quite a few other tricks they used to pull. There's a few other SAU peeps still on these forums that will have heard the stories direct from Alan Heaphy, Fred Gibson, and Jim Richards when we were lucky enough to have a great dinner with them
    • For all the talk of "these parts are junk" I generally recommend OEM because it's really not as bad as claimed. I have never seen or heard of a case like the N63 where the oil returns completely clog with coked oil for example in ~10 years or less. Would it be nice if it were a straighter path? I guess, but most modern cars use a scavenge pump instead of a pure gravity return. Also the factory lines that would be relatively simple to convert to braided are generally speaking hardlines from the factory. I would consider braided line to be a regression, not an improvement. It's also been engineered such that all the hardlines have appropriate strain relief where needed. There's absolutely room for improvement, for example the HKS advantage heritage intake piping shows just how much can be done to make the turbos fight each other less in OEM twin turbo configuration and reduce compressor surge but it's rarely a simple/straightforward process. I recommend looking at what the group A/N1 cars did, generally speaking the changes they made were necessary and proven in endurance racing.
    • Yes, multi relays needed, and possibly a diode. I'm not actually going to think about it though.
×
×
  • Create New...