Jump to content
SAU Community

Recommended Posts

Hey

just wondering a few things.

i have an HR31 import R31 that came factory fitted with an Rb20. I now have an R32 RB20det and R32 RB20det 5spd conversion in my car.

My question is... if i was to get an RB25det 5spd box would would i need to change? Would i need the rb25 slave cylinder or would what i have suffice ?

Cheers :)

Dave

Link to comment
https://www.sau.com.au/forums/topic/38679-r33-5spd-conversion/
Share on other sites

need to modify tail shaft to fit 25 yoke, need to modify crossmember to suit box (not a huge modification) and need 25 slave cylinder to fit on 25 box, its slightly different to 20 slave cylinder, could probably do something to make it work but 25 bolts straight on. Other then that, easy conversion

yoke and tailshaft should be a problem... Hardie(sp?) Spicer seem to be the ones to contact... cross member, easy as... I was just concerned about the slave cylinder. If its a direct bolt on replacement for the rb20 one i am happy :O

Cheers for the info RB20LagWagon

Don't know if this is any help to you but I was asking people at wreckers today about putting a r33 g/box behind my r32 and a couple people said all I need to change is the front tailshaft to the r33 one. I don't know if this info is right as a lot of people talk crap. Can anybody verify this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...