Jump to content
SAU Community

Shoujiki's Wtb Thread! For R34 Gtt

Shoujiki

By Shoujiki,
in Wanted to Buy

 Share

Recommended Posts

Shoujiki Proficient

Shoujiki

Posted
Posted

Hey guys,

Recently acquired one of these beauties and need some little things to get it up to scratch... most things are very small.

Here's the list.

- 2x Clips that secure the stock air snorkel to the front radiator support.

- 4x Clips that secure the lining in the boot / near the lights and side areas.. There those twist half out and pull kinda ones.

- 2x Clips that secure the plastic cover on the boot hinge.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- 2x Washer nozzles for the bonnet IF they are meant to be black normally .. (mine looked sprayed silver?)

- Nismo Clear side and front indicators.

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Billet Oil Cap

- My car has 2 red lenses in the doors for courtesy lights, but no lights/fittings behind them... does anyone have these fittings? What models had them hooked up?

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I know this is kinda wanky, but anyone have a kick panel flare? Mine's been removed! (wanted to make it all as original, not spending $100+ though...)

- One of those boot corner mounted sub boxes

That's all i can think of at the moment. Please let me know via this thread or PM if you have any of these or can help out in any way.

Thanks, Kurt.

Link to comment
https://www.sau.com.au/forums/topic/386923-shoujikis-wtb-thread-for-r34-gtt/
Share on other sites
rondofj Veteran

rondofj

Posted
Posted

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Seems like people are just messy when doing work and don't put stuff back properly! Common thing with people that don't know how to work on cars and take care of them haha!

Yeah I'd say the courtesy lights are wired up for certain models. I'm sure the GTR has them in, as i've seen a few lit up. They must just use the same door panels. I'd like mine working though, be a nice touch.

Got a few parts already from some great members here, thanks so far!

So far have got :

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Clear side and front indicators.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

I also have had 2 offers for a flare (which i appreciate!) however there sold without the holder, mine has the holder removed, so I'd need that too. Around $50-60 is all I can swing to.

Bumparoo up you go!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

Hey Redline GTR... Yeah i actually found all the clips for my boot and what i needed from a local wreck here in Victoria... he still has quite a few on the car so give him a bell ... he has a R34 wrecking thread . Suji is his username.

So i need these last few things:

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I have the flare now, BUT, i need the "holder" part that screws to the kick panel itself .. anyone got a car that has the flare removed but still the holder?

- One of those boot corner mounted sub boxes

Thanks!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- One of those boot corner mounted sub boxes

Have sourced a flare and holder from an awesome member that gave me it for nothing! So, just the final things on my list left now above, anyone help out?

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- Plastic Trim that hides the screws that mount the driver side mirror, interior panel. Commonly where people put spllt tweeters. (mine has a busted clip)

Bump! Updated and removed parts I have sourced and now have. Added in one more interior panel, not sure what you'd call it but it's a panel that hides the screws for the drivers side mirror, its a triangle shape with 2 clips. Mine has 1 busted clip so need a new panel.

cheers.gif

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)
- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!">

Updated!

Edited by Shoujiki
  • 2 weeks later...
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

Bump! Just need these last few bits!

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...