Jump to content
SAU Community

What Not To Do When Installing A Cold Air Intake

Silvarh

By Silvarh,
in Engines & Forced Induction

 Share

Recommended Posts

Silvarh Apprentice

Silvarh

Posted
Posted

So guys today my friend and I installed a D1 Spec oil catch can and a K&N cold air intake into my RB25DE. This took quite a little time as I was given some wrong piping and tried my best to fit everything together which I eventually did. So roughly 2-3 hours into the project we've installed everything and I'm hooking up the last pipe onto my catch can and to my dismay I find that the pipe that the hose is attaching to is too big! I tried to heat up the hose to stretch it and expand it but to no avail. So I ended up buying a hose to fit onto it which surprisingly fit as it was a Ford Falcon pipe of some sort. So with everything attached I go to start up my car and what do you know.. it chokes out. Amazing. I gave up and went inside and thinking about how I dismantled the OEM pipes I realized that /sigh... I put the air flow sensor on back to front =.="

So tomorrow I'm going to try and fix this problem and hopefully fix my car lol, I''ll share this picture of everything that I've done today. If anybody can find anything else that I may have done wrong please feel free to post, all the more help is welcome lol!

*Oh and the reason the black pipe coming out of the catch can is massive is because I just bought it and didn't know if it would fit properly or not so I was just trying it on.*

idiotqs.jpg

Silvarh Apprentice

Silvarh

Posted
  • Author
Posted

My mechanic told me that Iv'e got an oil leak problem with my engine and the cost effective preventative measure against any possible damage was to install the catch can. I'm not 100% on what the exact problem is aside from being told that I'll have to rebuild most of the engine /sigh.

  • Like 1
boostin31 Enthusiast

boostin31

Posted
Posted

My mechanic told me that Iv'e got an oil leak problem with my engine and the cost effective preventative measure against any possible damage was to install the catch can. I'm not 100% on what the exact problem is aside from being told that I'll have to rebuild most of the engine /sigh.

Usually an oil leak problem is from a seal or gasket leaking, catch can wont do SFA to stop that...

NYTSKY Grand Master

NYTSKY

Posted
Posted

Your intake pipe is too short, you need to lengthen it so it sits behind the headlight. Otherwise as stated you will just be sucking hot air where the pod is now.

I dont think that clear pipe will last too long either.

Silvarh Apprentice

Silvarh

Posted
  • Author
Posted

I've got a snorkel that I can attach to the filter, would that help at all or would i need to get a longer intake pipe? Also getting a new engine would be tough as I'm currently a full time student zzz

WYTSKY Veteran

WYTSKY

Posted
Posted

I would just get a longer pipe, one that comes down to behind the passenger headlight (where the airbox used to be) put the pod on the end of that, then gets some good cool air flowing to it, otherwise it is worse then stock.

student + skyline... been there done that.... it can be hard...

mad082 Grand Master

mad082

Posted
Posted

I've got a snorkel that I can attach to the filter, would that help at all or would i need to get a longer intake pipe? Also getting a new engine would be tough as I'm currently a full time student zzz

a new motor by itself with none of the loom, etc (which you wouldn't need as you can use your current stuff) wouldn't cost that much. a few hundred dollars. then get a few mates round and spend a few hours putting it in

Silvarh Apprentice

Silvarh

Posted
  • Author
Posted

I think I'm going to take up on what everyone is saying and save up to buy a new engine. Seems the logical thing to do as my engine has seen its best part of 18 years lol. 4 months till I'm off my P's so time to save for an RB25DET! Btw thanks to everyone who gave me some pointers with this, really appreciate it ^.^

Silvarh Apprentice

Silvarh

Posted
  • Author
Posted

Oh and to post the proper problem why it wasn't working.. I accidentally hooked the catch can hose up to the idle control valve (not sure if that's the correct name). Hopefully that may help people in the future haha! Time to find a nipple and weld it onto the pipe I'm running off the throttle body. Btw as per suggested I've extended the intake pipe so that the filter sits behind the headlights.

starwarz Proficient

starwarz

Posted
Posted

well i guess you could say why bother with a skyline of any type whilst a full time student etc, but yeah i'd be leaning towards the new motor option, the n/a rb25 is worth about as much as an rb30 lol

Me and my mate attend Uni full-time for the last 2 years both with R34 25GT's, both cars have been solid its when you start mucking around with them stuff goes wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      The FD RX7 is the best looking 90's JDM car

      By Dose Pipe Sutututu · Posted

      Well it does have a motor with the same DNA as an Accord V6 motor. The J30A is a successor to the Tiger rice cooker C32A motor found in those cars.
    • Ozdavroz
      The FD RX7 is the best looking 90's JDM car

      By Ozdavroz · Posted

      FD RX7 I would probably marry if legal R32 GTR is toughest NSX looks like it's made from leftover Prelude and Accord bits  
    • silviaz
      R34 Wheel Alignment Specs

      By silviaz · Posted

      When going to a suspension shop should I send them the default nissan settings or just let them do their own thing? I ask this because I have aftermarket rear camber arms and my car is lowered a bit (front end is basically stock after I change to those nismo bushes)
    • silviaz
      Squeaky bushes

      By silviaz · Posted

      Ok sounds good, thanks for your help. Hopefully if I end up changing it to the nismo bushes I don't get that veering issue. I don't think there's a point in lubing up these bushes again. Weird that it it makes just as much noise with all the grease inside it versus without grease prior to removal. Bizarre.
    • GTSBoy
      Squeaky bushes

      By GTSBoy · Posted

      Yeah, you don't need camber bushes on stock arms to make a car drive straight unless it's got another problem. F'rigsample, slide the thing into a kerb, bend the front subframe mounts a little....subframe is now twisted, shifted or otherwise in the wrong spot...and you need to do funky stuff with the wheel alignment to get it to drive straight. Maybe a little more caster on one side, or a little more camber. FWIW, I can have my camber off side to side by a half a degree or more, and either way, so more one side, or more on the other, and the car doesn't really want to pull to one side. It will definitely ride road camber differently, and want to track uphill (ie, towards the centreline when on the LHS of a normal crowned piece of road, like it should) or want to roll downhill (which it really shouldn't). But on fairly flat road surfaces, like the middle of a 3 or 4 lane motorway, a half a degree either way doesn't make a lot of difference. I sometimes do quite a few miles with my wheel alignment messed up, because I don't always get a chance to set it right again after a serious dismantling, before I have to drive it to work again. Like, a whole week's worth of daily shuffle.
×
×
  • Create New...