Jump to content
SAU Community

Recommended Posts

Sorry to be a stain and make so many threads but I wonder a lot and I get asked questions, "Why aren't you doing this", "Wouldn't this be more economical/powerful". My question is why is the CAI placed behind the front headlight, shouldn't it be placed in a clear line of air rushing past the vehicle. An idea thrown at me was creating a metal box around the CAI and placing in the direct airflow near the body kit somewhere or putting a small hoodscoop on to provide more air rush to the CAI. I'm sorry if my words of description are silly but i've been asked by others around this topic.

Link to comment
https://www.sau.com.au/forums/topic/387406-rb25-na-position-of-cai/
Share on other sites

there's no outright correct way to do a CAI, behind the headlight is just usually the cheapest because that's where most factory air-box's are. A good CAI needs to be in a position where gets can get descent airflow and cold ram air. This can even be achieved with a rear facing intake like in a induction hood, which makes use of the air piling up on the windshield creating positive pressure. which is how the old school NASCAR's use to run, when they used factory car's like the camaro back in the 60's and apparently was good for 15-20hp when you were above 150km/h. but that is not as efficient as the front of the vehicle.

the power increase will never be great but the main reason you should do a cold air intake is so the engine doesn't get hot engine bay air and increase the likely-hood of pinging and such. especially with turbo cars because the act of compression of the turbo's increases the air temp, and this is compounded when the air is hot to start with, just compare driving your car in summer and winter.

but mainly just give the engine cold air who really cares where it comes from.

Ah okay, this may be taking it off topic a bit because the topic has been answered quite simply, I have read many threads on turboing a N/A, but can I get someone clearly here to right

All out price:

Needed parts:

Wanted parts:

I just want a round about idea, I am sitting on not much money at the moment but I just want to know prices and pieces needed clearly. Also is it worth looking into supercharging a RB25DE? brother wanted to know because he thought it may be more simple then turboing it, but in threads i've read it's harder.

Thank you very much

Edited by Brendonams

Yeah i've seen on ebay half cut skylines for a RB25DET for 3k, what do you think about them?

yep, the half cut could be the way to go . . you then have a motor designed for boost and (if fitted by a mechanic) a warranty. . . . do your maths first , as others will tell you, its cheaper to buy a turbo powered car in the first place . . . i paid 3k for my 32GTS-t with mildly modded RB20DET, quick enough to get you into trouble real easy

Blowers are legal

yeah, no.

as for CAI's, don't bother spending too much money on it as the gains are minimal (mostly in the drivers head). on a modern car that already has a bit of a CAI from factory, the gains are only a matter of a few kws. in a lot of cases i wouldn't be suprised if there is no gains.

Not in Tassie (Hole) yet ;p, I mean they're bringing in laws soon so we "Catch up" with the rest of Australia but still atm you can drive forced induction cars no HP limits, v8's there are actually no limits for power.

Haha I'm only 16 and it was kind of my first car xD, trust me wont be the end to my skyline family in the future I will (Hopefully if not dead) be driving a forced induction with a turbo loud enough to scare any cat from the road .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...