Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

This thread is interesting to me as I fill with optimax as there is a shell 10 doors down from my house, however I do occasionally use the bp stuff if I am shopping or whatever as there is no shell there.

To be honest my car needs a damn good tune anyway but I definately get better economy from the optimax.

A couple of you guys mentioned optimax as being 92 ron fuel to begin with and then modified somehow to acheive the 98 RON whereas bp and Mobil are refined at 98 RON from the beginning.

Can one of you please supply me or post here if you wish your reference for this information. Because if the Shell issue is a concrete fact I wont touch it again.

is there any problem with mixing fuel?

when my gf takes my car out she insists on filling it with caltex vortex fuel, but i will always only put BP ultimate in.

i did find that my car's exhaust would pop while accelerating at high revs and lately it hasnt been doing that. im not sure if its the better fuel or maybe just the cooler weather

Guest two.06l
is there any advantages in running BP ultimate and octane booster? will it increase the octane rating or not, im thinking about only using it for when i take my car to the drags

get the most out of your octane booster by getting it your car tuned with it in your tank

Problem with that though is without the octane booster the engine will ping at high revs. You want to tune the car with what you will be using. Like I said my car was tuned with Mobile and like most guys who have done this find their cars either run like shit with Shell or in some cases ping like mine :D

Hi Guys, I think you need to check out your local supplies. Just because it says "Shell" on the servo doesn't mean that all the petrol sold there came from a Shell refinery. In Qld, WA and SA, Shell don't have 98 octane enabled refineries, so my understanding is they buy it from BP. Being Kwinana in WA and Bulwer Island in Qld. In NSW and Vic it is the reverse, the refinery at Clyde produces something like 25% of Australia's total petrol and the Geelong refinery produces about 50% of Victoria's petrol.

So my understanding is;

In Qld, WA and SA all Optimax and Ultimate is refined by BP

In NSW and Vic all Optimax and Ultimate is refined by Shell

I don't know about Caltex/Ampol, but you can find out by calling the local refinery and asking.

Bottom line, I don't think you can say that Optimax is this and Ultimate is that, it really depends on from where it is sourced.

guess it's all part of the marketing con.... u're buying BP being sure you get diffrent fuel from Shell, in fact BP & Shell has an arrangement to have all BP fuel done by Shell...

so what's the difference.... just go buy any fuel, it's like tax, you can't afford not to pay for it and still getting the same juice.

Hi Bez, Taree hmmm, I would say your Optimax would most likely come from the Shell refinery at Clyde, so it is "real" Shell petrol. Any further north and you might get "Optimax" from the BP refinery at Bulwer Island, so it wouldn't be real "Shell" petrol. I have never had a problem with Optimax from Clyde. Since Clyde is the source of the V8Supercar control fuel it can obviously produce "good" Optimax.

I would say, ignore the comments from guys in other states that get their Optimax from different refineries, some of which aren't even Shell.

Shell doesn't guarantee the 98 octane do they like bp does?? I was under the impression there was only one refinary for optimax and that was down south (clyde). I didn't think WA had optimax and i was told by a shell operator in qld when they ran out that it was because of the refinary down south not being able to supply enough for everyone. That refinary is the sole optimax supplier to my beliefs. We've got 2 or 3 oil refinaries in brisbane. One is bp and the other was caltex and i think there maybe a 3rd which is jointly owned by neumanns and morland energy. A lot of the refinaries are getting their fuel from overseas at the moment.

As far as I know, its a fact that BP Ultimate (who use the best Western Shelf Crude Oil) refine their fuel to 98 octane, where optimax is like putting a bottle of octane booster in your tank.

I have it on good authority.

I don't use the crap.

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...