Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different. Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality. Whilst on BP98 in adelaide knock was rarely over 20. With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120! Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low. There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in! I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different.  Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality.  Whilst on BP98 in adelaide knock was rarely over 20.  With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120!  Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low.  There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in!  I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

Hi Sly, in Adelaide you got Ultimate from Kwinana, arguably the best refinery in Australia. Made from NW Shelf crude, arguably the best in the world outside Saudi Arabia. When you come to Sydney you get Optimax from Clyde arguably the worst refinery in Australia, not that Geelong is much better. Made from Bass Straight crude, also arguably the worst in Australia.

There is ongoing capital expenditure at both Clyde and Geelong, aimed at fixing their consistency problems. Plus they simply have to, because of the emmisions demands. From what I can tell, if the 2005 standards where applied now, they wouldn't be able to sell Optimax. Too much sulphur, for one.

Ask the high performance 2 stroke guys (bikes and karts), their engines give fuel a real work out, that's why they use Elf. Not only higher performance from a superior formula, but consistent quality as well. You get what you pay for.

i see alot of people have trouble with optimax, i have run my car on optimax for a month now and car is running great not missfiring or anything. i tend it hard to find bp ultimate around my area. i have used it once and it felt the same as optimax. as for mobil my car runs like shit on it

I am yet to find a Japanese import with stock ECU run better on Optimax than BP Ultimate, one thing I have noticed with Optimax is, it gives the greatest amount of K's per litre. (R32 GTSt, R33 GTS25t, R33 GTR, Forester S/tb, Legacy GTB, GC8 WRX, Pulsar GTIR all seem to like BP Ultimate, and Mobil Synergy 8000 best.)

I work in a motorcycle shop in Rockhamton and the first thing we say to a customer when they ask what fuel to run in their bikes is DONT RUN OPTIMAX then followed by what fuel is suitable. The fuel is heavier and thicker and it fouls the plugs very very quikly this goes for all bikes and jet skis. many a time have we had someone come in with a fresh full tank of optimax wondering why their bike stopped working. :bonk: I guess it might not matter in a car becuase the sensors might pick it up and the ECU would a adjust the mixture in some way. It also turns your plugs a funny colour aswell i guess thats because of the type of chemical used to boost the octatane. Pity you cant run good ol avgas in your cars becuase you cant beat it :D

by the way, i dont notice any power difference or poping in my exhaust using optimax, however i do find i get more k's from a tank of ultimate..

and on another note, Synergy 8000 (or whateva it is) and BP ulitmate are the SAME! they come from the same refinary, from the same tanks and often from the same trucks. its not unusual to see a bp truck in the Mobil on the pacific hwy. and i think the one on epping road too...

my 2 c...

Hi guys. I work in the oil industry so know a bit about it, but not too much on the additives in refining. In sunny WA, the BP Kwinana refinery supplies all fuel to all outlets of all other brands - they are the only refinery within a coupla thousand clicks, so that would seem to make sense! But they just sell raw refined product to the other guys. Shell, Caltex and the rest add their own recipes of additives to produce their "own" fuel. BP may, depending on the contract, add some basic additives for some buyers. Being selfish, money-grabbing capitalists, BP don't sell their 98 octane Ultimate to anyone else in WA - especially not Shell!! So Shell have to make do with a raw 95 octane product, which they chuck a few things in to give it the yellow pecten touch :thumbdwn: .

As for the NW Shelf crude being wonderful stuff, you have to be careful which field you are talking about! Most production currently comes from the Wanaea & Cossack fields (operated by Woodside) and the Griffin field (operated by BHP Billiton). These produce a nice, light crude ;) (quite different from each other, but not dissimilar to Arabian Light), which fetches a good price on the spot market. The Wandoo field (Exxon Mobil), Stag (Apache), Legendre :dump: (Woodside) and a load of smaller fields (ChevronTexaco and Apache, mainly) all produce crude ranging from nice, light crude :aroused: to thick, 'orrible, gungy stuff that is not exactly the refiners dream :throwup: . Then their are the Timor Sea fields, including Laminaria (Woodside), which produces a crude that you could put straight into your diesel motor and run it with no problems. In refining terms, you can produce a high octane cut from any crude, but you will have to work harder with some than others and your yield will vary depending on the feed stock. Refiners are always trying to plan the mix in their feed stock tanks, and hence the stuff they are buying (often when it is on the high seas), so as not to have to change operating parameters too much in the crude distillation units.

So BP Kwinana will be buying crude from all over, as will the Eastern states refineries. And they will try to buy stuff that they are set up for, without being raped on price on the spot market.

Meanwhile, given that it is the only 98 octane fuel available here, I use BP Ultimate. And it still gives me black crap on the back of my white car! (Just wait until I get an S-AFC!

Hope this helps. Interesting thread!

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...