Jump to content
SAU Community

R34 Gt Engine Advice

Booted34

By Booted34,
in General Automotive Discussion

 Share

Recommended Posts

Booted34 Apprentice

Booted34

Posted
Posted

Hi all!

I'm new to SAU and was interested in some advice. I have a 34 sedan with GTT brakes and suspension fairly well sorted out. In the future I am planning an engine swap. What do people think of an Sr20 instead of rb25t. Why?

To save weight over the front end. To reduce overall weight. To give better power to weight ratio I am not interested in huge power, the car is a daily driver, of course I want more power than what I have.

I know they don't sound as good but I'm not to worried. As I drive on freeways a bit as well as windy roads I was thinking the s15 6 speed. I know its not strong but as I said I am not interested in big power just a nice balanced drive. Any advice is greatly appreciated thanks!

Link to comment
https://www.sau.com.au/forums/topic/387547-r34-gt-engine-advice/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

just stick with the rb25. while the sr20 is a decent motor, it is lacking in torque compared to the rb25. the weight difference isn't that much when you look at power to weight ratios of the entire car. cost wise it's probably a lot cheaper to use the rb25, and i dare say a lot easier to do the conversion. using the 6 speed would also result in you having to change gears more often than the 5 speed, and when sitting on the highway the actual revs it sits on at the speed limit won't be that much different.

Booted34 Apprentice

Booted34

Posted
  • Author
Posted

Thanks mate! I appreciate your advice. In case you're wondering i was thinking that i would have much more power and tourque than what i currently have with a sr20. You made a good point about trying to keep the conversion simple though. Maybe I should stick with an rb. As for the gearbox I don't mind changing gears and because of the gearing on the car I find myself looking for 6 th often. I guess you can change the diff ratio but then I could miss acceleration. I am thinking of fuel economy too. I thought maybe a vq35 6 speed with the RB? Thanks again!

mad082 Grand Master

mad082

Posted
Posted

Thanks mate! I appreciate your advice. In case you're wondering i was thinking that i would have much more power and tourque than what i currently have with a sr20. You made a good point about trying to keep the conversion simple though. Maybe I should stick with an rb. As for the gearbox I don't mind changing gears and because of the gearing on the car I find myself looking for 6 th often. I guess you can change the diff ratio but then I could miss acceleration. I am thinking of fuel economy too. I thought maybe a vq35 6 speed with the RB? Thanks again!

you seem to be a bit mis-understanding of the 6 speed gearboxes. they haven't simply taken a 5 speed box and added in a taller gear for 6th. what they have actually done is made every gear shorter than the 5 speed. you will find that 5th gear on the 6 speed box is a 1:1 ratio, which is the same as 4th on the 5 speed box, and 6th on the 6 speed box is only about 5% lower than 5th in the 5 speed box. so in reality, if you were at 2500rpm in 5th in the 5 speed, you would only drop down to 2375rpm in 6th in the 6 speed. (that is based off using the same diff ratio)

Booted34 Apprentice

Booted34

Posted
  • Author
Posted

Thanks I had heard the ratios in a 6 speed were lower. I am planning to change the diff anyway, so I could choose a lower ratio whilst I'm at it. Couldn't that work? Sorry to be a pain at this point I am just keen to improve the car as much as I can whilst I do the conversion.

mad082 Grand Master

mad082

Posted
Posted

i could write another long post pointing out the negatives of using both the SR20 and the 6 speed, but i could be bothered. just stick a rb25det in there and be done with it. a sr20 with 6 speed and taller diff is going to be crap to drive. the r34 is heavier than the s15 so 6th gear isn't going to be that useful. the slightest hill and you'd probably have to either floor it, or drop back a gear.

  • 1 year later...
  • 5 months later...
Ares180BPM Explorer

Ares180BPM

Posted
Posted

Slip light is to let you know wheel slip has been detected and that traction control has kicked in to correct it.

When i changed to an aftermarket ECU the traction control stopped working all together, so i took the bulbs out for both TCS and Slip.

If you haven't changed your ECU, you may want to get a diagnostic done to find the fault code and hopefully get it cleared.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...