Jump to content
SAU Community

Recommended Posts

ok the time has come to get rid of this car, and its gotta go now....

R33 GTS-25T M-spec 75,000 k's

- 1993 bugundy manual

- 3 inch Nismo exhaust w. 7in. Cannon muffler

- Front mount cooler

- Apexi 3 stage EBC

- Aftermarket chip (not sure what sort)

- Greddy Turbo Timer

- Recaro bucket seat

- Short shift Kit

- 18 chrome deep dish wheels

- whitline lowered suspension and camber kit

- Stereo consisting of 6 stacker cd player, tweeters, 6inch speakers front and rear, equalizer, amp and two 12in. subs.

- calsonic radiator and fan

- Greddy oil cooler, remote oil filter

- Greddy recirculating BOV

- Strut braces front and rear

- Boost guage

- Oil temp. guage

- sunroof

- Carbon fibre bonnet

Car runs extremly well, VERY clean car(seriously).

will supply with original bonnet as well.

Car must go ASAP

$18,400

will upload pictures when i get the chance, e-mail or pm me if interested. will consider trade

Link to comment
https://www.sau.com.au/forums/topic/38761-this-r33-is-different/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
×
×
  • Create New...