Jump to content
SAU Community

Recommended Posts

Hi guys, after what seemed like forever, my 370gt is finally arriving from Victoria this week! I will need to register it in WA asap and was wondering if anyone has got away with passing the pits with factory HID still installed? Is the light obviously a different colour or is it a subtle difference only? If possible i would like to avoid the rigmarole of swapping over twice. Its the stupidest ADR! Any advice appreciated. thanks

Link to comment
https://www.sau.com.au/forums/topic/387673-over-pits-with-hids-in-wa/
Share on other sites

Hi guys, after what seemed like forever, my 370gt is finally arriving from Victoria this week! I will need to register it in WA asap and was wondering if anyone has got away with passing the pits with factory HID still installed? Is the light obviously a different colour or is it a subtle difference only? If possible i would like to avoid the rigmarole of swapping over twice. Its the stupidest ADR! Any advice appreciated. thanks

Nice one, Tom. Is it still blue? :)

If you need help with HID's, a member on here from WA is an expert on those things. His username is DRIFT or something. I forgot his name. He's a friend of a friend who did my bodykit for and had chatted with him before regarding HID's.

I can ask for his number or something through Facebook. If you want, let me know.

Good luck.

Edited by VNS 24

As soon as it turns on it dims and then Goes brighter, easiest tell for hid.. um depends who u go to for compliance. Maybe put standard bulbs on for it and then swap them out

it needs to be wired up differently though right? if it was just a 10 min job i wouldnt mind but im kind of time poor at the moment so DIY wiring is probably not an option.

Nice one, Tom. Is it still blue? :)

If you need help with HID's, a member on here from WA is an expert on those things. His username is DRIFT or something. I forgot his name. He's a friend of a friend who did my bodykit for and had chatted with him before regarding HID's.

I can ask for his number or something through Facebook. If you want, let me know.

Good luck.

Cheers Vic, nope i went for a silver one this time :)

yeah if you dont mind, could you see if you can get his number?

Thanks for the replys. I might wing it to start with and if gets rejected i'll go for plan B. Im pretty sure you get 2 goes at the examination for the initial price.. I heard that you can get the cars inspected at various garages these days too?? Anyone know where? I bet they must be much more easy going then those losers at the licencing centres.

I just put my 35 into an autosparky joint to get all the hid wiring cleaned up for pit passing and will be trying soon.. will let you know how i go :P not hopeful but. probably have to change out to halogens to get over the pits.. if you go first lemme know :P

cheers

kohbz

I just put my 35 into an autosparky joint to get all the hid wiring cleaned up for pit passing and will be trying soon.. will let you know how i go :P not hopeful but. probably have to change out to halogens to get over the pits.. if you go first lemme know :P

cheers

kohbz

Will do. Im going to try this joint if i can get a booking:

ANG Automotives

1/10 Malland Street MYAREE 6154

Light vehicles only (under 4,500kg gross vehicle mass)

No motorcycles over 250cc *

Pre-book: 9317 3025

Cheers Vic, nope i went for a silver one this time :)

yeah if you dont mind, could you see if you can get his number?

Sure, Tom. I will do so after work today.

Just have a chat with him and see what he says.

Who ever complied the car should have removed the HIDs. This would of made it easier to get registered in your state. When mine was complied I just asked for my HIDs back and after the car was registered I put them back in.

Andrew, V36 HIDs are auto leveling but they don't have the washers which what's required to meet the latest ADR,

Who ever complied the car should have removed the HIDs. This would of made it easier to get registered in your state. When mine was complied I just asked for my HIDs back and after the car was registered I put them back in.

Andrew, V36 HIDs are auto leveling but they don't have the washers which what's required to meet the latest ADR,

The cars registered in VIC. They passed it over there only a few months back but im pretty sure its less strict there. I'll let you know how i go in the inspection tomorrow. All this because a little bug got squashed on a headlight. :merli:

The cars registered in VIC. They passed it over there only a few months back but im pretty sure its less strict there. I'll let you know how i go in the inspection tomorrow. All this because a little bug got squashed on a headlight. :merli:

Ah, so the car is already registered. When it was complied it would have had the HIDs removed then, once it was registered the previous owner would have refitted them. Compliance requirements are nation wide, HIDs are removed if they don't meet ADRs.

Ah, so the car is already registered. When it was complied it would have had the HIDs removed then, once it was registered the previous owner would have refitted them. Compliance requirements are nation wide, HIDs are removed if they don't meet ADRs.

It wasnt done at comliance and it passed in VIC. AND good news!! It passed here too..

Word of advice. Take your cars to private garages for inspections, not licencing centres. The owner was a young, easy going guy.

Im happy as larry :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, I'm sorry if this has been discussed before.  I have a 2008 Japanese import V36 coupe with nav but without Bose. I bought one of those AliExpress android screens, which for the most part works really well.  The only thing that doesn't work is the air con controls (well sort of) and the factory reverse camera.  The AC can be controlled fine but it doesn't report the change in temp and mode to the screen, and the volume knob/other audio controls from the panel don't register on the learning app.  I am pretty certain that the problem is the difference in the head unit between base model (Nav but no Bose) 2007-2009 coupes and anything after 2009.  Mine is the one with the blue connector all the way to the right as seen in this forum post:  The reason I think this is there is one wire left over that doesn't fit anywhere on this head unit, or in the factory screen which also uses different connectors to more recent versions.  I've seen the upgrade from OWC, and have sent the guy a message on eBay but no response yet.  I also don't particularly need the whole kit, just *maybe* an adapter for this one cable.  Did anyone else here have the same problem, or have any insight about what I can do to get this working?  I have been in contact with the seller but all they seem to be able to do is ask for more pictures and videos. Minor edit to add:  I have been researching and found a screen on Aliexpress that actually specifies my head unit in the listing, so these things do exist.  I will contact the seller to see if the wiring adapters are interchangeable with other screens.   Thanks in advance!
    • Can't go wrong with tourings/estates/wagons. 
    • Oh poop ! I missed the "deposit" in your post ! 
    • I laughed so hard a snot bubble popped out my nose !  And seriously ! You can still buy a decent house in Western Sydney for 2 mill ? ? 
    • Come on guys, they're just trying to sell their project car to scrape together a house deposit in the Western Suburbs of Sydney...
×
×
  • Create New...