Jump to content
SAU Community

Registering Highly Modified Gtr

Jap_Muscle

By Jap_Muscle,
in Queensland

 Share

Recommended Posts

GTRNUR Grand Master

GTRNUR

Posted
Posted

Just Get QLD rego, send him to an engineer and get a mod plate. Why all the fuss? Technically you dont need a modplate until you get pinged by a cop anyway.

Or until you have a car accident and the modification is noticed. Then your property, 3rd party property, and CTP insurance becomes invalid and you spend the rest of your life riding a bus because every cent you earn goes to paying off your debt. If is above board you minimise your chances of having issues later.

A dodgy RWC could be obtained but that doesn't protect you down the road. All it allows you to do is bypass a step and allow you to get number plates on the car. Its still not legal.

RB25/30's I've seen in QLD Skylines all had mod plates. Its a general engine substitution code LA1. Any QLD workshop that does engine conversions of any kind can at least point you in the right direction. If your lucky they can even do the code for you.

Just curious, but can VIC transport defect a QLD registered and modification approved car?

Jap_Muscle Mentor

Jap_Muscle

Posted
  • Author
Posted (edited)

What about aftermarket turbos? is there a issue with that?

Ive called a few placed in QLD and have secured a rwc agreement. The issue atm is sorting out a Mod Plate, just dont want to risk giving the car to the buyer then him running into issues in qld with the mod plate.

From my understanding, any vehicle with outer state state rego cannot be defected at all.

Ah right in that case I'd be giving Dan at ERD a call, pretty sure he can do mod plates and roadworthies. He's a top bloke and will be able to tell you exactly where you stand with every mod. Screamer and no cats won't fly though lol.

07 3807 2789 or sales@erd.com.au will get you in touch.

Shame you have to sell it, sounds like a weapon :)

Left a message, hopefully ill hear something soon. Yeh it sure is a shame ive had this car since high school. but gota move on at some point. Recently posted the final tune in the RB30 dyno results section. Check it out.

Edited by Jap_Muscle
045HOW Mentor

045HOW

Posted
Posted

Or until you have a car accident and the modification is noticed. Then your property, 3rd party property, and CTP insurance becomes invalid and you spend the rest of your life riding a bus because every cent you earn goes to paying off your debt. If is above board you minimise your chances of having issues later.

A dodgy RWC could be obtained but that doesn't protect you down the road. All it allows you to do is bypass a step and allow you to get number plates on the car. Its still not legal.

RB25/30's I've seen in QLD Skylines all had mod plates. Its a general engine substitution code LA1. Any QLD workshop that does engine conversions of any kind can at least point you in the right direction. If your lucky they can even do the code for you.

Exactly. I'm not saying the buyer should just drive it without it being engineered/approve/modplated. But your car is pretty much all normal for QLD so just sell it to him and direct him where to go to get it all sorted. But if you are the one that has to get it all sorted. Certainly shop around or even find a friend on here cause there's definitely a chance of being un-necessarily shafted by some workshop.

Raysboostin Mentor

Raysboostin

Posted
Posted

rb26/30 (must be mod plated)

intercooler holes under battery tray (may require a mod plate have an engineer inspect)

reo bar slightly modified for front bar (may be illegal have an engineer inspect)

3.5 straight pipe with muffler, no cats (highly illegal!! have some fitted)

screamer (highly illegal!! have it plumbed in)

u will find you'll prob need a mod plate for the non standard turbo as well. but check with an engineer.

Raysboostin Mentor

Raysboostin

Posted
Posted

I'd say he's working on VIC regs.

QLD Transport CAN and DO emission test you, see a recent thread in this section about it. My XF was also tested once, although I didn't get a defect or fine as it is not a skyline...

However, I've never heard of it having to be done for rego or a mod plate before.

EDIT: You only get away without a mod plate if that particular engine (RB30) was offered as a standard option for the model you are installing it in (R34). It wasn't, so you WILL need a mod plate.

Really?? i was talking to the people at qld transports modifications desk and they told me they dont do them at all and i'd need take the car interstate to have it done.

045HOW Mentor

045HOW

Posted
Posted

Really?? i was talking to the people at qld transports modifications desk and they told me they dont do them at all and i'd need take the car interstate to have it done.

This.

AFAIK Sydney is closest.

lilcrash Veteran

lilcrash

Posted
Posted

u will find you'll prob need a mod plate for the non standard turbo as well. but check with an engineer.

Qld laws are pretty basic, only things I've ever seen people need a mod plate for is engine conversion or to change the seating capacity.

Jap_Muscle Mentor

Jap_Muscle

Posted
  • Author
Posted

Qld laws are pretty basic, only things I've ever seen people need a mod plate for is engine conversion or to change the seating capacity.

I think what is complicating this excercise is the fact that im trying to do it down here in VIC.

will keep you guys posted on whats happening as im seeing another engingeer

045HOW Mentor

045HOW

Posted
Posted

AFAIK the word from QT is that if an intercooler hole is under 100mm and isnt in a place that can do damage then its fine by them. That was a reply someone got back from QT in regards to the topic posted on another forum. Dont get the reo checked over because it cant be mod plated and would cost a million dollars to fix and engineer. Everyone has their front reo missing.

  • 2 weeks later...
  • 2 weeks later...
Jap_Muscle Mentor

Jap_Muscle

Posted
  • Author
Posted

Sorry guys i completely forgot about this thread.

Sold the car a few weeks ago to a different buyer. Wanted to handle things himself so i just sold it to him as is. No mod plates no RWC no nothing! I guess he knew what he was doing. Sorry if i couldnt be more help guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • MBS206
      NC MX5

      By MBS206 · Posted

      It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • Duncan
      NC MX5

      By Duncan · Posted

      oh yeah, reminded this morning....bin lids frozen shut too
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      In my case not, because of total reno. But yeah.
    • FRGTN1
      R34 Manual conversion Speedometer

      By FRGTN1 · Posted

      Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...