Jump to content
SAU Community

Recommended Posts

Price $6500 (willing to negotiate in person)

Located in canberra but would be happy to organise transport with buyer.

great car for daily duties or great platform for a track car

car does not run the best under load at the moment because the Haltech maffless ECU needs the fuel mapping to be tuned properly but i have been driving it around town and keeping it under 3500rpm and it is not an issue that needs addressing right away.

it went in for a roadworthy inspection last week but got knocked back because of the front mount intercooler and atmospheric blow off valve. it would cost about $300 to buy the standard parts to pass rego but there are plenty of members willing to lend out bits.

any questions please email me at [email protected] or txt me on 0422626173

R32 GTST Manual. Wine red (AN0)

RB20DET

RB25 turbo 13psi

Split dump exhaust with 2 mufflers and a silencer for rego( not to loud but free flowing)

195kw atw

Haltech Computer

GTR front bar

GTR wing

Coilovers front, Nismo rear suspension. Solid mounted rear.

18x8 front and 18x9.5 rear Starcorp Impul

Custom cushion button clutch.

Alpine Head unit, 7in fold-out dvd/tv screen. Subwoofer. Focal front splits and tweeters. Sony rear speakers.

Hicas lock bar, all lines and solenoids removed.

have a set of brand new rear wheel bearings and the standard intake piping and hosing

Recently done rear brake pads, oil,coolant, spark plugs, fuel filter and injector cleaner and brand new 550cca battery

post-85840-0-38410500-1326255031_thumb.jpg

post-85840-0-98329400-1326255048_thumb.jpg

post-85840-0-31071600-1326255062_thumb.jpg

post-85840-0-62877800-1326255081_thumb.jpg

post-85840-0-94591800-1326255103_thumb.jpg

post-85840-0-03420000-1326255121_thumb.jpg

post-85840-0-27776900-1326255137_thumb.jpg

post-85840-0-28562000-1326255155_thumb.jpg

post-85840-0-19763700-1326255173_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/387889-act-r32-gtst-type-m-6500/
Share on other sites

  • 3 weeks later...

fuelling issues have been fixed so now it drives great. at first i thought it was the fuel mapping but it turned out that the fuel pump was shot. it now has a new Bosch 040 with new relays.

once it passes its roadworthy inspection i will put the front mount intercooler back on along with the BOV and maffless intake pipe and take it for a dyno evaluation.

how do i edit the main add because i need to change some information

Fwiw, I knew this car from around 2005 - 2010. A friend owned it for a couple years, then sold it to another friend who later sold it, probably to this guy?

It was a good honest car back then. And always looked after. I've probably done 10,000 + kms in that passenger seat...

  • 2 weeks later...

lol im still wanting to see the dyno sheet for that 195 atthe wheels :whistling:

it's really not that unbelievable seeing as it has everything you just said plus an rb25 turbo.....

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...