Jump to content
SAU Community

Recommended Posts

post-10298-0-37540300-1326369821_thumb.jpgHello members, sadly I have to face the fact that I am unable to continue with my passion ( have a health issue) so she is up for sale. This car has been done right and is a very serious machine that has had all the bugs cleaned out and is ready to race, have fun and be competative. This GTR is a all Nissan GTR and does not run other manufacturers box's or major mecahnical components as my intention was to compare GTR with GTR and I was and still are not interested in a GTR with say a two spead glide etc. The car has not even been seriuosly leant on yet as she has been built with precision and will cope with what is mentioned in the following.

Any way here goes with the basic run down - all gear is less than 12months old and we have only conducted 2 serious passes and I did not even go to the track this current season. I will consider a tough street car as a swap but it would have to be something special.http://s584.photobucket.com/albums/ss282/exXU1/?action=view&current=gtrtest.mp4

Three years of work , lots of money spent and tons of hours to get to this stage.Only ran a couple of times last year and pulled some great early results - ready to run some low eights this year , nothing to spend and ready to rock and roll. 1:28 60' and 136 miles per hour half track and shut down 3/4 as I blew a cam seal - small issues now sorted. Heaps of reciepts for parts and thanks to a couple of buddies all the labour was done by us three as ateam. Over $140k spent on this car with no labour content, is and will be a serious contender, currently quickest GTR in WA with it;s firsts pass od 9:2. Very genuine reason for her sale and it's not money! Open to all sensible offers and i will not be giving it away. This car is straight as a dye and the undercarrige was mint when a street car - still have the v spec tags from when she was originally registered.

The car has been totally gutted and started from scratch and is all in ANDRA Spec. Launches like its on rails.

Nissan GTR Skyline Drag Car ( Super Sedan class DYO handicap or Sports Modified Class where the index is 7.75 sec)

Engine : RB26/30det Hybrid (RB26 Twin Cam Head on a Australian delivered RB30 Block)

RB30 Block:- chemically cleaned, sump rail drilled to suit RB26 AWD sump/ adapter plate, front drilled to suit adjustable and idle pulley for twin cam head, head bolt holes drilled to suit 12mm head studs, block 1/2 filled with Hard Blok, bored and honed to 86.5mm, decked with receiver groove to suit o-ringed head and copper head gasket.

10mm Adapter plate for rb26 awd sump to rb30 block.

Sump modified for larger capacity with extra baffles and external pickup for oil.

Jun high volume oil pump modified for external sump pick up. Jun crankshaft collar

RB30 crankshaft nitrided, polished, balanced and oil holes chamfered.

Ross Metal Jacket Harmonic Balancer.

N1 Nissan water pump.

Nitto straight I beam con rods with ARP 2000 series bolts.

ARP Mains Studs

Mahle 9:1 forged pistons with modification for inlet valve clearance.

Remote oil filter with Canton 3L Accusump

ACL race series main and big end bearings

ARP 12mm 2000 series head studs

Tomei oil restrictors to the head

RB26 cylinder head:- chemically cleaned, extensive port work, combustion chambers de-shrouded and matched, decked and o-ringed to suit copper head gasket.

Supertech 1mm oversized stainless/inconel inlet and exhaust valves

Supertech double valve springs with titanium retainers and bronze/manganese guides with viton stem seals.

Tommei Pro camshafts

Tommei adjustable cam gears

Tomei cam studs

Tommei cam followers to suit small base circle cams.

Ridgecrest copper head gasket

Custom Tubular Exhaust Manifold (ceramic coated)

BorgWarner SX80 turbocharger (rated at 1300hp) with 1.1 a/r ceramic coated exhaust housing with oil supply filter

Innovative 50mm indy style waste gate

4" side exit exhaust with separate 2" for waste gate

Custom alloy inlet manifold with large plenum and single 80mm throttle body

12 1600cc bosch methanol fuel injectors

2 Powerflow anodised billet fuel rails with dual entry and centre exit

Aluminium intercooler pipes with 120mm thick intercooler and 50mm Tial BOV.

RCI plastic fuel cells

2 x Magnafuel 2500hp efi fuel pumps (methanol)

1 x Bosch 044 fuel pump for NOS fuel supply(vp109 or race E85)

4 x Magnafuel pre and after fuel filters

Annodised hose fittings with lightweight black Kevlar hoses

2 x Magnafuel fuel pressure regulators

6 x Mercury outboard CDI ignition coils

2 x M&W Prodrag CDI units

Magnacore ignition leads

EMS Engine management using Staged injection 6x6 @720deg, 2 step launch control, NOS control, Thermo Fan Control, 6 ignition outputs, Tacho output

Water & Air temp inputs, TPS input, CAS input, Lambda input, transbrake/launch input, Full datalogging.

Innovative Boost Controller with twin solenoids and adjustable boost ramps

Innovate 32 Channel data logger with 8 channel exhaust gas temp unit, lambda unit and gauge, RPM input, TPS input, Engine block vacuum pressure sensor, Boost pressure input, 6 x Exhaust Gas Tech thermacouples. Stop/Start logging button with onboard SD card memory.

NOS direct port system. Initially this is to be used to spool the turbo whilst the transbrake is on. Using around 200hp of nos and race type gasoline separate to the methanol fuel system. Eventually the NOS will be used for full passes.

Greddy 50mm aluminium Radiator and 14" thermofan

Tuned on C&R Powerflow Engine Dyno 1000hp @7500rpm with 29psi, 1200hp @7500rpm with 43psi, approx 1400hp with NOS activated (not tested)

Approximately 1200@6000rpm with 43psi on the transbrake with 200hp of Nitrous activated.

BMS built RE4R03A Jatco transmission bolted to Standard GTR transfer case, featuring Full manual reverse pattern valve body assembly with transbrake and attessa control, all shafts and planetary sets softened and rehardened and chryogenically treated, carbon band, raybestos plates and kerwen steels, Vasco shaft from box to transfercase. This gearbox is the first of its kind to be setup for drag racing. The size of the clutches and shafts indicate that the box will be capable of handling over 1500hp.

B&M Quicksilver 4 speed shifter

Large transmission cooler with dedicated thermo fan boot mounted.

TCE torque converter with 9 ½" housing with 8" stator and mechanical diode setup for 6000rpm stall on the transbrake.

Cusco 1.5 way front diff

Standard centre diff with 2wd/4wd switched via solenoid using gearbox line pressure

Custom fullspool rear diff.

1 piece large dia, large uni tailshaft and forward shaft by Final Drive

Custom Billet EN26 axles allround by Terry Stacy

Standard GTR brakes with DBA rotors

15 x 8" custom Advan lightweight drag rims (made for Tomei r34 drag car)

26 x 10 x 15" M/T drag slicks

HKS Prodrag Fully adjustable shocks and springs allround

Full rose jointed and adjustable suspension allround (adjustable lower and upper and castor)

Urethane mounted cross members

Stroud Parachute

Velo carbon fibre race seat with 5 point 100mm harness and arm restraints

Full 6 point roll cage

Defi gauges and controller with shiftlite and lambda gauge

Lightweight aluminium dash

Dry cell Battery, Tetzel wiring

Aluminium Bonnet and gaurds

Fibreglass doors

Carbon Fibre Boot with custom aluminium spoiler

Polycarbonate windscreen and side glass

Painted in candy purple with flake and extensive airbrush work including an all over Godzilla

$60k - Please no tossers

There are other things of course but lets talk about them. Give me a call if you are serious and dont be afraid to Please contact me if you are genuinly in the market for and animal with a differance. May consider a swap for a nice street car- try me as you never know.post-10298-0-91183200-1326369748_thumb.jpgpost-10298-0-37540300-1326369821_thumb.jpgpost-10298-0-54413400-1326369842_thumb.jpgpost-10298-0-69770200-1326369853_thumb.jpgpost-10298-0-04987100-1326369855_thumb.jpg

post-10298-0-24678900-1326370087_thumb.jpgpost-10298-0-32099100-1326370092_thumb.jpg

post-10298-0-93917900-1326369863_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/388052-drag-gtr-8-second-car/
Share on other sites

- You know - your right - only when it comes to building one will a person realise it is as such :) So many things that you simply cant cost out realistically - ya simply must have the passion and desire.

http://s584.photobuc...yof100_5541.mp4

http://s584.photobuc...yof100_5925.mp4

http://s584.photobucket.com/albums/ss282/exXU1/?action=view&current=gtrtest.mp4

$60k???

What an absolute bargain!

thank you - I do to.

What a nice setup this is! I would have snapped this in a heartbeat if I was looking, but good luck with the sale mate. Best one on the market, I reckon.

I would to. We had plans to go to the Jamboree as we have been a few times before the car ws finished. We really wanted to get some times down first and as you can see I didnt even really get the chance, it would go straight out now and run a low eight without touching boost or tweeking here and there, has a nice refined fuel map with lambna readings and temps all under control , thats the beauty with Methanol - cool and can run a bit fat. Sadly no can do so time for some one to reap all the work gone into her.

ZOMG!!!!! congrats on a huge effort and awesome build.

would luv to see this go up against the RIPS 240Z.

Yes you are right but not many buff's have this sort of money for something that a lending society will let you borrow - maybe a secured personal loan I suppose . Dont know havent had one for years ?

$60k???

What an absolute bargain!

  • 2 weeks later...
  • 1 month later...
  • 6 months later...

I cannot believe that there is not a person who is cashed up out there that loves HP and realises that this is an absolute bargain ???/!!! Lots of dreamers but no one thus far with enough cash or balls to take her on.post-10298-0-33774100-1349088605_thumb.jpgpost-10298-0-75404400-1349088613_thumb.jpgpost-10298-0-69567700-1349088630_thumb.jpgpost-10298-0-01667700-1349088633_thumb.jpgpost-10298-0-47846100-1349088647_thumb.jpgpost-10298-0-99602400-1349088660_thumb.jpgpost-10298-0-88173700-1349088666_thumb.jpgpost-10298-0-72572500-1349088675_thumb.jpgpost-10298-0-87215400-1349088684_thumb.jpgpost-10298-0-77257700-1349088691_thumb.jpgpost-10298-0-28919700-1349088698_thumb.jpgpost-10298-0-16832200-1349088705_thumb.jpgpost-10298-0-77665000-1349088980_thumb.jpgpost-10298-0-15233400-1349089000_thumb.jpgpost-10298-0-29797900-1349089016_thumb.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...