Jump to content
SAU Community

Recommended Posts

Yeah through import mags have read good things about SVI they can find you a really modified car if you want. only thing is they take all the gear off for compliance then u have to get it put back on but when u see S2 R33's in top nick for $19 000 with it's own supply of free goodies for you then I'd say gimmie gimmie :headbang:

According to RAWS this is a big NO NO. Any non-standard parts that come in on a vehicle must not only be removed, but must also be destroyed. They cannot be put back on the vehicle after compliance. Indeed, they cannot even be sold. They must be destroyed and DoTaRS has been know to conduct random inspections on vehicles arriving on the docks, recording VINs etc and the aftermarket parts included on the vehicles and then asking for photographic evidence of their destruction upon submission of the VIC when applying for a compliance plate. Any RAW caught breaking these rules is liable to lose their accreditation. If you want to risk this as a customer then best of luck if you can find an unscrupulous RAW as you may get a highly modified vehicle cheap but I cannot imagine any RAW being foolish enough to risk this given the huge expense in setting up, and complying with, the RAWS.

I got mine at a dealer... Northshore Prestige. You pay more, but they installed a new clutch and an alarm for me. The cars they had there were all stockish, but clean as a whistle and you can take any of them out for a test drive before you buy it - which is why I didn't self import. Anyway, those guys seemed to know their stuff and they didn't bullshit me (like others I went to while looking around). All in all, it was pretty smooth.

I got mine at a dealer... Northshore Prestige. You pay more, but they installed a new clutch and an alarm for me. The cars they had there were all stockish, but clean as a whistle and you can take any of them out for a test drive before you buy it - which is why I didn't self import. Anyway, those guys seemed to know their stuff and they didn't bullshit me (like others I went to while looking around). All in all, it was pretty smooth.

i looked t northshore prestige as well...they let you take the car for a test drive, get an NRMA inspection, and seem very helpful...(i very nearly bought one from them, but the cash fell through)

they also dont mind throwing in goodies..like immobilisers, alarms, strut bars etc

Geoff from prestige motorsport returns all your phone calls, actively helps you find what you are looking for, has the patience of an angel and works hard for his agent fee. He has it down to an art form.

His business has staying power and a rock solid reputation. When I import I want there to be the least amount of risk possible, thats why i'm not game to try any of these 'newer guys' in the market. Buying through an experienced importer who has brought in huge volumes of cars only makes sense to me.

A big thumbs up to prestige who did a great job helping me import my Pulsar GTiR.. I wouldnt import my next car through anyone else. :)

www.prestigemotorsport.com

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks! Will get it looked at before winter 🥶 other than that she's a mint ride love it aye 
    • FWIW a lot of the local owners that do a big build tend to have cars that are perpetually broken. 
    • I just got this system but haven’t installed yet I got a Moroso sealed box (defect reasons) which will be set up same as their pic The quality is high grade, the correspondence I had with the owner (former head designer for Rockford Fosgate) was unbelievable, guiding me with what I needed. Even told me not to buy some things as it could be sorted in a different way at his loss. Just a bit of a bite with the exchange rate and don’t purchase gear in 1 hit that goes over $1,000 au, lol I forgot!  
    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I eliminate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for? (Apple car play? Android air play)? so If I swapped head units to save using a band expander, I’d likely lose those better features to have an oem Unit operational. Better to use a band expander and retain AirPlay options and newer version of head unit     provably best to band expand it, and focus on the nav unit. th isn’t  a big deal/ would be cool to have it working  from what I can tel we use a PAL Signal and Japan uses a NTSC signal  I don’t know if there’s a co better or if the screen only reads NTSC, or if it’s the tv module that needs replacing… no big deal don’t need it but more of a curiosity thing on that!   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
×
×
  • Create New...