Jump to content
SAU Community

Recommended Posts

Hi Martin

I'm looking at picking up a 2nd hand R35 which i'll likely never have the time or the budget to use on a track. If you're only going to use an R35 for street use with say some minor mods like an exhaust and a tune, are any transmisson modifications (and diff) needed for a long and happy life besides the use of your fluids?

Would appreciate your expertise on this.:worship:

Other than a fluid change the only thing I would recommend would be to replace the circlips in the transmission to stop the FWD transfer gear falling off with the resulting damage it causes. Hope that helps :)

Hello, why does this happen? Design fault?

  • 3 weeks later...

Hi guys

Australian GTR's seem to post slower 0 to 100 KPH times then overseas models. Any reason for this? Is it our fuel, or are they simple arriving here with less mojo??

For what it's worth, I strapped a gps based 'Performance Box' to a stock ADM 2010 model and managed 0-60kph in 1.9s, 0-100kph in 3.7s and 80-120kph in 2.1s. (This was with the use of launch control and settings on RRR.)

I did the same without LC and clocked 0-60kph in 2.3s and 0-100kph in 4.0s. (driver only with 1/2 tank of fuel, temp around 17c)

Has anybody else measured these times?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...