Jump to content
SAU Community

Recommended Posts

[quote name=ClutchBurndout-:(' timestamp='1326786705' post='6192170]

coilpacks

my worry is, why wouldnt he fix it himself? some lecky tape around the coilpacks is a quick fix... why would you sell a car with issues?

Cause he didn't know what the issue was?

Not everyone knows what causes a misfire in Skylines.

Just a quick reference, splitfire is the only correct fitting replacement, all the others only use 1 bolt and sit slightly angled as the bolt holes are wrong.

Bulshit. I installed YJ on my RB25neo a few weeks ago- perfect fit, sits straight and uses 2 bolts per coil.

hey guys!

bought the car, im in LOVE. i was about to order splitfires tomorrow, but i stumbled across a brand called superspark? the boys at autobarn sell them and they recommended them as a direct replacment for the coilpacks?? 1 guys uses them in hes rb25det and he loves them, they are 495 a set...

has anyone heard of these??

Edited by soultz

Bulshit. I installed YJ on my RB25neo a few weeks ago- perfect fit, sits straight and uses 2 bolts per coil.

maybe they finally pulled their finger out and got some made properly. it was 4 years ago that i went through all this garbage with my car.

<br />just bought some yellow jackets! cant wait for them to arrive!<br /><br /><br /><br />does anyone know how to change them over?? i cant seem to find where to start lol??<br />
<br /><br /><br />

Do you know how to expose the place between the cam covers where the coils live? Cross over pipe off, cover off, undo coil retaining bolts and disconnect the wiring plugs (bloody carefuly because they go brittle in the heat). It's easy. You need 8 an 10mm sockets and spanners, pliers for some of the hose clamps, etc etc. Only takes an hour or so.

Been using them for about a year now perfect fit with no problems also double check your ignition timing too advanced can cause a similar problem when air is cool and dense

just bought some yellow jackets! cant wait for them to arrive!

does anyone know how to change them over?? i cant seem to find where to start lol??

I have also been using yellow jacket coils for a year no problems at all. Just make sure you more then an hours time and also change some of the hoses on the cross pipe they are most Likely getting old as well.

There's a guide here:

http://www.skylinesaustralia.com/forums/topic/42819-rb25det-changing-the-spark-plugs/

If you're changing the coilpacks, consider changing or re-gaping the spark plugs (depending on your future mods etc).

Took me more than an hour haha.. the intake pipe going into the throttle body will get in the way of one of the coils as it crosses directly over it.

You can either remove a few pipe clamps/bolts and move it out of the way or completely remove it to access the coilpack.

It's not too hard to get at the coils.

Mine arrived today but I had them delivered to work...and I work from home on Wednesdays....

I got one of the guys I work with to bring them home as he only lives 10 minutes away so I get em at about 630. They should be in by 8.

Also a tip, leave the valley cover off. That way you don't have to stuff around with it every time you want to change your plugs.

Edited by Cowboy1600

Yeeeeehaaaaa!

My problem is fixed and for the first time since I have owned the car (nearly 10 months) it's running flawlessly. I pump it up to 11psi and floor it and it just pulls.

Here's hoping you get the same results.

its akways a good ideah to mate to do your plugs to ngk BCPR6ES

also while its all out do a compression test

I put a set of Iridiums I had kicking about in at the same time.

Compression test can go root a boot. I'll do that if I ever have any concerns that it might be down. The car doesn't get driven hard enough or often enough for me to want to do a preventative comp test.

Just a quick reference, splitfire is the only correct fitting replacement, all the others only use 1 bolt and sit slightly angled as the bolt holes are wrong.

Just a quick reference, you're very, very wrong.

YJs went in perfectly. No angle, bolts lined up perfectly. Fitting was a breeze.

hey guys,

installed 5/6 coil packs tonight, i was working on installing them and the 6th one had a different bracket for the screws to go into, 5 were the same direct fit, where as the 6th one was completely different therefore i could not put it in :( so ive contacted yellow jackets and am awaiting a reply...

on the good side....MY MISSFIRING PROBLEM IS FIXED!!! i changed the 5/6 and used a old one to test the packs and no more misssfiring! so happy!

thank you to everyone who helped aswell :)

i just hope i get to fit the last one soon :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...