Require A New Turbo?

[MAS_R33]

Hi,

I'm pretty sure that the turbo on my r33gtst s2 has just let go.

Waiting to confirm with the shop but no boost and lots of noise from turbo. Doesnt look good :-(

Anyone have anything local for sale?

Anyone know a local place to get the turbo Hi flowed? I asked one mob and they said it cant be done as it has ceramic (I thought the whole point was to replace with steel!!)/

Lastly, If I do go a larger turbo any thoughts on setup? I been reading a bit on the forced induction forums but too many options for me.

My car is relatively stock with Dump pipe,Turbo back exhaust, etc. Has recently had a h/duty nismo clutch put in it.

Thanks in advance for any suggestions

[Manuel Kasko]

Jump on the hyper gear website and have a look at their direct bolt ons

Also if yours isn't cracked you can send yours off to them and for around $900 they will repair and highflow it

Probably the best option for a stock setup unless your aiming for higher numbers then you have to start looking at other things

[Shaynesspk26]

What sort of power do u get out of a hiflow stock turbo with a fmic exhaust and boost controller

[Hadouken]

My mate has above said setup and he is on 250rwkw

[Manuel Kasko]

Around 190-210 maybe but you would need a tune so if your going cheap then maybe looking into an apexi safc

That will allow you to lean out the top end making better power. Right now with that setup will make te standard computer run pretty rich because it will trip put with all the air running in and just rich it up to be safe

What goal are you aiming for and we can tell you what Oi would need.

[Manuel Kasko]

Injectors run out of safe puff at around 220kw

You can tune past that but it's risky

[Mick_o]

Dont take your car to the mob who said ya cant because the wheel is ceramic lol

  On 16/01/2012 at 4:35 AM, MAS_R33 said:

Hi,

I'm pretty sure that the turbo on my r33gtst s2 has just let go.

Waiting to confirm with the shop but no boost and lots of noise from turbo. Doesnt look good :-(

Anyone have anything local for sale?

Anyone know a local place to get the turbo Hi flowed? I asked one mob and they said it cant be done as it has ceramic (I thought the whole point was to replace with steel!!)/

Lastly, If I do go a larger turbo any thoughts on setup? I been reading a bit on the forced induction forums but too many options for me.

My car is relatively stock with Dump pipe,Turbo back exhaust, etc. Has recently had a h/duty nismo clutch put in it.

Thanks in advance for any suggestions

[MAS_R33]

Has anyone had any experience on these turbos?

http://stores.ebay.com.au/Performance-Car-Parts-Australia/Turbos-/_i.html?_nkw=kkr&_fsub=304069017

[Manuel Kasko]

You pretty much get what you pay for.

I wouldn't suggest an eBay turbo they will fail pretty quickly.

Only ever heard bad things

Either buy another quality stock turbo for around $200 or get yours highflowed pull more power and have a safe setup

[RS4-S]

Id go an OP 6 turbo off an R34 neo. Nice little upgrade

[r33skylinegtst]

GCG turbo's can high flow it, no idea of price though but they have a very good reputation.

Might be worth having a read of this thread, http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/ check for other people running a similar setup to you and see what their results are like. Might give you some idea of which way you want to go.

[MAS_R33]

thanks all

[MAS_R33]

OK reckon im pretty sorted on a GCG hi-flow.

Any chance anyone got something to sell!!!! Can't handle the thought of car off the road whilst turbo being taken off, sent up and returned.