Jump to content
SAU Community

Recommended Posts

Hello guys and girls, my car is now for sale.

It will be a regretful sale as the car has come a long way since i first bought it but my priorities have now changed.

Not in a hurry to sell so please do not bother with the low balling..

1995 R33 GTR V-Spec

Midnight Purple

120,300kms

Pics:

qFJDLh.jpg

iFWoDh.jpg

IQ9t5h.jpg

ZMzAwh.jpg

Btinwh.jpg

Engine:

Unopened RB26DETT

Gates Timing belt

Tomei Type B Poncams 260 IN/EX 9.15mm lift

HKS Adjustable Cam gears

Sard 700cc Injectors

Garrett GT3582R 0.82

Custom teflon braided oil and water lines.

6Boost Custom manifold

44mm Tial wastegate with 3" stainless screamer pipe

3" Custom stainless steel dump pipe with flexi

HKS 3.5" Mild steel cat back

Splitfire coil packs

NGK BCPR7ES Spark plugs gapped to 0.80mm

Triple core radiator

Trust 100mm drag intercooler

K&N 6" pod

Front mount Oil cooler with oil relocator kit with braided lines to and from the oil cooler and engine

OS Giken STR 2CD Twinplate clutch

Braided clutch line

Aluminium air guide

Greddy oil filler cap

Apexi 1.3bar radiator cap

Custom Washer bottle / Oil catch unit

Bosch 044 Intank fuel pump

Brakes & suspension

BC BR Coilovers (height and damper adjustable)

Factory Brembo brakes all round

Remsa front pads

Bendix rear pads

DBA 4000 series rotors (front and back)

Wheels

Work Meister S1

Chrome dish gold center

Front: 18x10 -15

Rear:18x10 -2

Project Kics wheel nuts in Titanium Blue

Wrapped in Federal 595 ss 245/40/18

Exterior

Body coloured lip

Nismo clear side indicators

Rear pods

Interior/Electronics

Apexi Power-FC D-Jetro with Hand controller

Apexi RSM

Apexi EL2 boost, oil pressure, oil temp and water temp

Apexi EL2 Control unit

Greddy Profec b spec 2 Electronic Boost controller

Greddy turbo timer

Nismo 320km/h 11,000rpm dash

Nismo upgraded centre console 3 gauge cluster (Front Torque/Oil Temp/Boost)

Pioneer deck

Hertz Front splits

Dynamat on both doors

6000k HID Kit

White LED's for center gauges,cluster and aircon unit

Darkest Legal 35% tint

Current tune

485.9hp at all 4 hubs on 20psi – Tuned by Sean @ ASG. Could have made more power on the same boost but was tuned for my piece of mind.

Dyno Graph

Some things you might want to know:

The engine is in excellent condition, I have compression tested it twice since owning it got 170psi accross all cylinders both times.

I am more than happy to do this test again for interested parties.

The engine had its first 100,000km service at 66,000km before i owned it. Timing belt, bearings, water pump, seals etc were all changed.

When I installed the poncams 4,000kms ago I changed the timing belt and bearings again just to be on the safe side even though they were in pretty good nic.

I have serviced the car myself every 5,000kms with fully synthetic penrite oil, the gearbox has redline lightweight shockproof which is less than 1,000kms old.

Transfer case, front and rear diff oils were changed under 10,000kms ago.

The engine has no leaks, it is spotless and always has been.

The body isnt perfect (or maybe im just too fussy) so dont expect a showroom condition GT-R, it has a few imperfections but the colour seems to hide them quite well which is why they never really bothered me..

I will let the car do the rest of the talking as a quick drive will get your blood rushing :)

Price: $29,000

Call 0401 564 822 or send me a PM if Interested.

More pics available here:

http://imgur.com/a/VqMRq

Edited by snozzle
Link to comment
https://www.sau.com.au/forums/topic/388457-perth-mp-r33-gtr-v-spec/
Share on other sites

HOTTTTTTTTTTTTTTTTT

im in the market for another r32 gtr with a set budget....hmmm might be time to stretch the budget :P

goodluck mate this will get snapped up real quick

I am happy to ship the car via train anywhere in aus for 29.5k :)

Flights are cheap these days! jump on a plane in the morning, check the car out and be on your way at night! I can help with transport to and from the airport too, no problem there guys!

Oh it's more getting it registered in this state, almost impossible unless $ in engineering fees. Nice car either way!

Fair enough bud!

Agreed, this car is a great buy. Always enjoyed seeing the build thread pop up with new updates.

Whoever gets it will definitely enjoy it no doubt.

Haha cheers, I'm still waiting for the results from your beast ya know!

  • 3 weeks later...
  • 1 month later...

Price drop to $28,000!

I may consider a revised price if you BYO wheels but i really cannot be bothered removing anything else and I am no longer interested in swaps as I have a new daily lined up already.

  • 3 months later...
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...