Jump to content
SAU Community

R32 Gtr Steering Vibration

R32SOM

By R32SOM,
in General Maintenance

 Share

Recommended Posts

R32SOM Contributor

R32SOM

Posted
Posted

Hi guys I have an r32 gtr. Couple months ago I started to notice vibrations from the front when taking off and steering left and right at low speed (0-20kph) feel a lot of vibration from the front wheels, driveshaft. Though driving 30kph and onwards there is no vibration and car drives perfectly. So I thought I'd go buy a bush kit for front suspension from whiteline and installed them. Got a wheel alignment done and still same problem. Can anyone help me solve thus problem?

Thanks (Daniel) r32som

Link to comment
https://www.sau.com.au/forums/topic/388595-r32-gtr-steering-vibration/
Share on other sites
jiffo Mentor

jiffo

Posted
Posted

These cars are getting old, CV joints, propshaft universals are all showing their age.

You can have a guess as you've done with the suspension components (which were probably getting on anyway), or take it to a workshop.

As it's happenng when turning, CV joints would be my guess.

Propshaft will be a constant high speed vibration with noticeable heavy vibration on powerful lift off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • defari
      What Music Are You Listening To?

      By defari · Posted

    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      I have an Elite 2500, honestly most of this has been a lot of smaller tasks chasing little details and a whole lot of life getting in the way of bigger projects. I don't mind too much looking at a spectrograph vs having audio knock ears. 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Nah nah nah nah. Don't do it. It's not all about the full throttle power delivery. The main "street fun" and drivability gains from smaller rear (in this case) is how you will have boost available from a low rpm when yo just roll onto the throttle. Think jinking in and out of traffic, coming out of roundabouts, etc etc, where you just want to roll onto the throttle a little and have the spooly noise from ~2000rpm and a swell of torque. More of what you've already achieved by going to 2.5. And then, towards the tail end of 2025 you can pull the turbo 4 out and put in a V8 like we originally suggested. :P
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cheers for the info mate, I'm old too, 60 years old next May, so a more linear delivery of the 0.86 would be better as baking tyres and snapping heads isn't on the cards for me or the car I assume a more linear power delivery would be better for engine and drivetrain reliability as well, IRT the torque load at lower RPM???, as well as lower EGT's???, if my understanding of that is correct, have I got that right??? I've only got a really basic understanding of turbo sizing and all there characteristics  Cheers for the useful information 
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      What kind of power delivery are you after? If it's nice and linear, the 0.86 would be better. If you're after bake tyres and head snaps on boost the 0.64 would be fun. I'm boring and old, so linear power is preferred. Lately I've been watching videos on Z06 Corvettes and super charged Mustangs.... 
×
×
  • Create New...