Jump to content
SAU Community

Recommended Posts

I'm with Bob buy them. It is inevitable that coils on a neo will fail.

I am not usually a fan of buying parts just in case but there is almost no downside in buying stock coils for that price. Make sure you buy coils for an R34GT-t / neo RB25DET not the R33 in that Ebay advert.

Alternatively buy a can of crc urethane seal coat and give the coils a good even spray it will keep you going for a good while in most cases.

Definitely get a new fuel pump - Deatschwerks, Denso, Nismo, Bosch 044 and wire it directly for full voltage (with a relay - tutorials on this site) and change your fuel filter. Do you have a high flow panel filter? Whatever air filter you use check to see if it needs replacing.

I reckon I'll do my fuel pump before I get the Nistune. Which one is regarded to be the best?

The Walbro GSS-342 seems popular, but I've read good things about the Nismo and Deatschwerks to!

The walbro's are good (If you get a legit one) but only up to around 20 psi, for boost above that I would recommend either of the other pumps. What are your power goals?

Hmm, sounds like the Walbro would be suitable - I'm not looking to set the world alight...

I reckon I'll do my fuel pump before I get the Nistune. Which one is regarded to be the best?

The Walbro GSS-342 seems popular, but I've read good things about the Nismo and Deatschwerks to!

I got the deatschwerks, hardly breaks the bank at around $215 delivered, and small like the walbro

cheers

darren

my GSS342 is not to noisy, makes a bit of a buzz from time to time, i put rubber inserts in my cradle to stop vibration and noise(R33 Skyline).

i have a few mods planned for the year for my s2 RS4S.

walbro GSS342

nismo injectors

splitfire coilpacks

HPI FMIC

z32 AFM

TD06H-20G (internally gated version with replacable actuator springs - not chasing to much power)

tomei oversize metal headgasket - so i can run 16-18 psi through the neo.

ECU - probably a nistune, wasnt real happy with my powerFC.

i think that should make me a tidy 250awkw without pushing the engine to hard.

Edited by OMY31T
  • 2 weeks later...

Cheers thanks for the info.....Yeah I currently have a flat spot at 5000rpm thinking its the coils tried taping them up as well as a high temp sealant ...with no change....I just don't want to get the car on the dyno and something like that fail and have to get it re tuned later........Change spark plugs recently and re gaped them to

I've got a pod filter and in the proces of making a cold air box for it.....

Thanks again ....

Flat spot is the tune. Cool packs break down. Of you can get new OEM cheap, do it now, has to be done at somepoint and means you aren't risking a tuning session.

Pumps: nismo or bosch

Cat: got a highflow item?

Ebc: yes, gizmo are good value.

Air filter: new highflow is $50, check yours.

O2 sensor? Has it been replaced? Dunno if your tuner will touch closed loop anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...