Jump to content
SAU Community

Recommended Posts

As topic states... no bullshit. Swaps maybe for something of interest

- 1989 HCR32 4 door

- Genuine 112,000kms

- New belts and service

- New driver's side window switch

- New bonnet release cable

- New centre vent

- No oil leaks

6months Rego

**************There is a slight scratch/dent on drivers rear door thanks to a truck merging into the car on the F3 (zoom pic c)**************

All inspections are welcomed

ENGINE:

* - pod filter

* - Kakimoto catback

* - Aftermarket dump

* - Type RS BOV

* - Front mount

* - Exedy clutch

* - 52mm Radiator

* - Silicon Rad hoses

* - Currently running 11psi

SUSPENSION/BRAKES

* - HSD Coilovers (less than 1000km old)

* - Nismo rear strut brace

* - Some bushes upgraded to nolathane

* - Slotted rotors F+R

* - Intima SS Pads F+R

* - Dot 4 brake fluid

* - LSD

* - KKR Adjustable Pillow ball Tie Rod Ends

* - KKR Rear Traction Rods

* - KKR Rear Camber Arms

* - KKR Lock Collars (solid sub frame bushes)

* - KKR Rear Toe Arms

* - KKR Adjustable Front Camber Arms

* - Varrstoen 18 x 9.5” +12 all round (almost new)

* - 225/40 Falkens 595 in front (almost new)

* - 235/40 cheapies on rear (almost new)

INTERIOR

* - Apexi Boost Gauge

* - Apexi A/F Gauge

* - Apexi Fuel Pressure Gauge

* - Apexi turbo timer

* - Blue Carpet

* - Blue gear boot and handbrake boot in leather

* - Short shifter

* - Sony Headunit

* - 6 ½ in Soundstream Tarantulas in doors

* - 6 ½ in Soundstream Tarantulas in rear

* - Custom Rear Parcel Shelf

* - 2x Amps

* - 2x 12in Pioneer Subs in box

EXTERIOR

* - Dark Metallic Blue

* - Aero Mirrors (electronic)

* - GTR Bonnet (genuine)

* - 25mm Vented Front Guards

* - Crystal indicators

* - GTR copy front bar

* - vertex style rear bar

* - vertex style side skirts

* - Rear wiper removed and plugged with custom made alloy plugs

* - boot de-badged and shaved and spoilers holes filed (Welded)

* - Rolled Guards

* - 6000K HID Low beams

After $9,500

Car is located NSW Sydney Region

Link to comment
https://www.sau.com.au/forums/topic/388726-phat-r32-4-door/
Share on other sites

Looks nice mate these days 32gtrs are getting around for not much more. Not saying its not worth ur asking price but dont think it will sell in a day or so

Link to comment
https://www.sau.com.au/forums/topic/388726-phat-r32-4-door/#findComment-6196502
Share on other sites

nah no real issues what so ever. looks low thanks to the vertex kit but quite a bit of clearance underneath. aircon was removed by previous owner. forgot to add that tho internal controls etc still all remain as do pipes out from the firewall

Link to comment
https://www.sau.com.au/forums/topic/388726-phat-r32-4-door/#findComment-6200593
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
    • I was more thinking so it doesn't flop around as much rather than for rotating it. Once you have the balance right, it should rotate well enough, depending on how much resistance there is on the pivot. I think you said the pivot point was on a bearing though didn't you?
×
×
  • Create New...