Jump to content
SAU Community

Detailing On A Budget?

Jasonr31

By Jasonr31,
in Exterior & Interior Styling

 Share

Recommended Posts

Jasonr31 Enthusiast

Jasonr31

Posted
Posted (edited)

Hey, i'm after an off the shelf (aka autobarn / supercheap etc) polish / pads to use to try and get some of the swirls out of the paint on my project. Budget is small (aka the less i spend the better) and im not after a perfect showroom finish. My housemate has one of those cheap supercheap buffers and already have some mothers quick detailer / clay bar and a wax. Just after advice on a polish and pad to use and any tips to get the best out of the average buffer. Really not interested in spending heaps, and i understand you get what you pay for but car will mostly be a track / weekender and already has chips etc so doesnt need to be perfect. Any help would be awesome.

Cheers, Jason

Edited by Jasonr31
Link to comment
https://www.sau.com.au/forums/topic/388925-detailing-on-a-budget/
Share on other sites
ARTZ Grand Master

ARTZ

Posted
Posted

just get yourself some light cutting compound.. i got one here Mequirs Mirror glaze 2, Finecut cleaner, was only 15$ or thereabouts...

If you look on the bottles they have an indicator showing how heavy they cut on a scale of 1 to 10..its about 5...have a go with something like that and if it doesnt work maybe try something a little stronger..then work your way down to a light cut and then a sealant/wax..

Probably best to have a seperate pad for each but if you really wanna cheap out just wash the pad in hot water, it will be dry enough in the sun in about 15 minutes .

I would use a fresh pad then for your wax though.. :thumbsup:

Antonio_Waxit Collaborator

Antonio_Waxit

Posted
Posted

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

Jonno34 Mentor

Jonno34

Posted
Posted

if you're on a tight budget i reckon just use your hands? a foam pad will be like ... 5 bucks for 2 or less for the meguiars ones? - they arent much more than the SCA one so dont stinge out, may as well get the megs ones!

use that, a good microfibre cloth .. and i really liked autoglym paint renovator when i first got my skyline. and follow it up with a better wax like meguiars tech wax .. or find something like naviwax which has some filling properties .. not the best solution but on a tight budget its probably a better solution than getting a machine and pads etc.

probably a better idea than using a supercheap buffer :\

or perhaps borrow/loan somebodys if you know anyone near you who has one

all the best mate :)

mxfly Veteran

mxfly

Posted
Posted (edited)

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

I tried one of those $40 polishers from supercheap at my mates house one day and they have absolutely zero abilities to correct paint.

And I agree with Ant. If you don't have the funds to buy a decent machine, try and get a group of ppl to chip in and just share the usage.

Edited by JDM Performance
Jasonr31 Enthusiast

Jasonr31

Posted
  • Author
Posted

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Jasonr31 Enthusiast

Jasonr31

Posted
  • Author
Posted

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Jasonr31 Enthusiast

Jasonr31

Posted
  • Author
Posted

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

  • 5 months later...
m.j.h Mentor

m.j.h

Posted
Posted

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

QFT

I bought one of the Concours polishers and wouldn't use anything else

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring over comms. Everything critical must still be hard wired.
    • TurboTapin
      RB25DET Solid lifter conversion

      By TurboTapin · Posted

      I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...