Jump to content
SAU Community

Recommended Posts

Hey, i'm after an off the shelf (aka autobarn / supercheap etc) polish / pads to use to try and get some of the swirls out of the paint on my project. Budget is small (aka the less i spend the better) and im not after a perfect showroom finish. My housemate has one of those cheap supercheap buffers and already have some mothers quick detailer / clay bar and a wax. Just after advice on a polish and pad to use and any tips to get the best out of the average buffer. Really not interested in spending heaps, and i understand you get what you pay for but car will mostly be a track / weekender and already has chips etc so doesnt need to be perfect. Any help would be awesome.

Cheers, Jason

Edited by Jasonr31
Link to comment
https://www.sau.com.au/forums/topic/388925-detailing-on-a-budget/
Share on other sites

just get yourself some light cutting compound.. i got one here Mequirs Mirror glaze 2, Finecut cleaner, was only 15$ or thereabouts...

If you look on the bottles they have an indicator showing how heavy they cut on a scale of 1 to 10..its about 5...have a go with something like that and if it doesnt work maybe try something a little stronger..then work your way down to a light cut and then a sealant/wax..

Probably best to have a seperate pad for each but if you really wanna cheap out just wash the pad in hot water, it will be dry enough in the sun in about 15 minutes .

I would use a fresh pad then for your wax though.. :thumbsup:

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

if you're on a tight budget i reckon just use your hands? a foam pad will be like ... 5 bucks for 2 or less for the meguiars ones? - they arent much more than the SCA one so dont stinge out, may as well get the megs ones!

use that, a good microfibre cloth .. and i really liked autoglym paint renovator when i first got my skyline. and follow it up with a better wax like meguiars tech wax .. or find something like naviwax which has some filling properties .. not the best solution but on a tight budget its probably a better solution than getting a machine and pads etc.

probably a better idea than using a supercheap buffer :\

or perhaps borrow/loan somebodys if you know anyone near you who has one

all the best mate :)

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

I tried one of those $40 polishers from supercheap at my mates house one day and they have absolutely zero abilities to correct paint.

And I agree with Ant. If you don't have the funds to buy a decent machine, try and get a group of ppl to chip in and just share the usage.

Edited by JDM Performance

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

  • 5 months later...

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

QFT

I bought one of the Concours polishers and wouldn't use anything else

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...