Jump to content
SAU Community

Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Tom,

ps new HSV's have the butterfly valve for exhausts, they arent "high end cars". a lot of people cannot afford high end cars.

As with ABS and powersteering, the technology eventually becomes available to more as it gets cheaper.

How isn't a HSV "high end"??? bogan royalty!!! New HSV's arn't exactly cheap either though...

Here is some revenge on the stupid government that is killing the car seen! Even though its not cars I just saw it and laughed. Thanks to the PM the economy is going down hill. So they need squeeze money from car enthusiasts to keep the government alive.

http://www.smh.com.au/national/pm---dragged-away-after-being-trapped-by--protesters-20120126-1qj1c.html

and to anyone reading this and miss the article on A current affair the link is here

http://aca.ninemsn.com.au/article.aspx?id=8408192

Here is some revenge on the stupid government that is killing the car seen! Even though its not cars I just saw it and laughed. Thanks to the PM the economy is going down hill. So they need squeeze money from car enthusiasts to keep the government alive.

http://www.smh.com.au/national/pm---dragged-away-after-being-trapped-by--protesters-20120126-1qj1c.html

and to anyone reading this and miss the article on A current affair the link is here

http://aca.ninemsn.com.au/article.aspx?id=8408192

i am getting dumber reading your post

and it is 10pm on Australia day and i have had 20 beers

that is a impressive achievement

Just been doing a quick search on youtube and found this

http://www.youtube.com/watch?v=-NjRJRqjswA

Morons like this guys that kill our car seen and makes laws tougher on us, what idiots on the road.

Just been doing a quick search on youtube and found this

http://www.youtube.c...h?v=-NjRJRqjswA

Morons like this guys that kill our car seen and makes laws tougher on us, what idiots on the road.

Bullshit. People have been getting defected simply because its an EASY WAY TO MAKE MONEY. It has NOTHING to do with the hoons, the hoons story is just the icing on the cake for them to put it on top to make a shit idea look good. The public probably doesn't give a shit if people are getting defected for exhausts, window tint, etc. But show them these people racing in a tunnel then have the government claim that that is why they are doing it and BINGO. Something the public will jump on side with.

You want me to honestly believe you have driven through any tunnel in a skyline and NEVER EVER given it some stick to hear the sounds in a tunnel. If you can HONESTLY answer that you haven't, have a pat on the back and sell your skyline.

How can you be a skyline driver and be so f**king boring?

I really doubt there is many, if any, here who have not genuinely given there car some stick to either A) hear it, B) feel it, C) show it.

Edited by SargeRX8

poor Bernard!

well, serves him right for crusing in Surfers Paradise! haha

Tom,

nice!!! SLS FTW!!

hahaha on the coast, bogan central, somehow all the houso's seem to have new HSV's...i dont get it!

hahaha on the coast, bogan central, somehow all the houso's seem to have new HSV's...i dont get it!

When paying rent and utilities is more of an option than an obligation you end up with cash to toss around. Mind you what's a 2 year old hsv worth these days - 40k give or take?

The bugger has got an exemption for no reason, its a load of crap. Deserves everything he gets, considering the fact that he was probably violating the terms of his exemption anyway.

Really harsh there, considering we don't know the whole story... I really love how the news crew was there when they originally pulled him over... so not set up at all.

How can you get an exemption for no reason? In the film clip I see a V8 Range Rover and the M3, both need an exemption for a P plater to drive, legit reason for him to have an exemption is he doesn't have a non Pplate exempt car to drive, hundreds of others have the same exemption.

And this statement is a bit of an Oxymoron " considering the fact that he was probably violating the terms of his exemption anyway.". Fact and probably in the same sentence.... :glare:

Tomic should have gone home after the first incident unless his exemption is valid and him getting caught the second time was within his exemption conditions. Although chances are the cops are right.

umm I'm sure he had an option to buy a car that was not turbo or 8cyl. pretty simple right? people taking the piss on laws (or thinking because they are famous or have money that they can ignore them) are exactly what makes it so much harder for normal people.

for every wanker like that, the rest of us have to work 10x harder at being good

There's a lot of bitching in here but has any one had any dramas over this operation?

I am not real happy about it but have to take my car up to Syd tomorrow to drop off.... Hoping if I run into them they'll take pity on the blonde with the ACT plates!!

There's a lot of bitching in here but has any one had any dramas over this operation?

I am not real happy about it but have to take my car up to Syd tomorrow to drop off.... Hoping if I run into them they'll take pity on the blonde with the ACT plates!!

Just bat your eyelids, and giggle a lot.

You'll be fine....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...