Jump to content
SAU Community

Recommended Posts

Hey guys,

Now that I've started exercising properly again my wrist (fractured+plate due to being hit by a car on my motorcycle years ago) has started getting irritated, to the point where days after exercising my whole arm will be aching.

It's been hurting more often just in general so I'm thinking it would be a good idea to get it consistently looked after.

Can anyone recommend a good physio in this area?

Map.jpg

Chuuurs.

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/
Share on other sites

Marginally off-thread JEPPE, I wouldn't discount an acupuncturist who's a member of the AAA. Such practitioners are consulted by football teams to shorten recovery time.

So if the physio has given you limited improvement,......

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6204888
Share on other sites

its hard to find a physio that doesnt do the token treatment these days. They will do a little bit of assessment, rub it a bit, use an ultrasound on it and then TENS machine with either hot or cold.

If you can find someone that doesnt just go through the motions and do that then youll be better off. Unfortunently I cant recommend anyway in your area as im from canberra...

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6211737
Share on other sites

How about an Osteo?

I have a very good one just near me. They aren't just for backs etc :)

I found better improvements there than going to the local physio - who has all sorts of sporting team accolades from Olympic teams etc.

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6211910
Share on other sites

You can buy your own TENS machine these days for not that much $$. Add in some research on exercises and the physio service doesnt really cut the mustard.

Id suggest you try Terrys suggestion & give accupuncture a go. You may very well find it extremely helpful.

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6211989
Share on other sites

How about an Osteo?

I have a very good one just near me. They aren't just for backs etc :)

I found better improvements there than going to the local physio - who has all sorts of sporting team accolades from Olympic teams etc.

Hey, I'm after an Osteo (I reckon a bad osteo is better than most physio or chiro's)..

Send me the details!!

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6212376
Share on other sites

its hard to find a physio that doesnt do the token treatment these days. They will do a little bit of assessment, rub it a bit, use an ultrasound on it and then TENS machine with either hot or cold.

If you can find someone that doesnt just go through the motions and do that then youll be better off. Unfortunently I cant recommend anyway in your area as im from canberra...

Kathy at Good Sport Physio in Deakin is awesome, she doesn't just do the typical stuff...

As for acupuncture, some physios are also doing dry needling now, if you can find a physio that does that (similar to acupuncture) than that is a good idea, a lot of physios are trained in more than one modality these days so if you can find one like that than I would give them a go...

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6215480
Share on other sites

Thanks everyone. Ash can you plug please?

Will check out Kathy and research some acu, as long as they allow it to be covered by TAC then I'll try anything and everything... at the same time! (not really)

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6221105
Share on other sites

  • 2 weeks later...

a physio is a good idea. Go there with some requirements ; 1) manage the present injury /soreness. 2) get a set of recovery and strength movements for that arm.

You likely have underlying muscle / tendon weakness from the damage you sustained from the accident. Recovery to 'normal function' so you can do office work etc. doesn't reveal the strength differences between the two arms.

My guess is you are experiencing tendonitis from exceeding what that arm can handle by giving it the same loads and work that your good arm is doing when doing weights. This makes perfect sense.

What you can do is focus on movements for wrist and grip strengthening for that arm, once it's not sore. This will see you right in a few months. The good arm will not be doing anything while you are training the strength back into the bad one. the goal is to have an equal strength in both (bad arm is playing catch up).

So don't do things like bicep curls and other movements that will load the forearm muscles until you have it right.

If there is no permanent damage to tendons in the arm , then there should be a good chance you will be back to normal in no time.

Link to comment
https://www.sau.com.au/forums/topic/389411-physiotherapist/#findComment-6242765
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...