Jump to content
SAU Community

Recommended Posts

Car does daily duties on this set up > http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/page-42

And the above for a drag day.

Notice the backend was changed and also no WMI is used alongside the C16 as it kills the power. Afrs are around 12.0 so injs have a little room still.....and so does the turb :yes:

Havent sorted the suspension for it to hook and put down an Et yet tho.....

my turbo has no antisurge and stock airbox...there is no whistle

actually apart from exhaust noise there is nothing

poor Bast#rd!! the whistle is awesome, get the cover and fill the streets with some RB 3076 whistle!! Edited by AngryRB

GTX wheels have quietness as one of their design targets - they are intended for industrial etc use, one of the reasons why some of the more high performance targetting (ie, EFR, HTA) potentially will have the edge in other ways over them, as response/wide & tall compressor maps etc are the intentions.

I'd take a closer look at a "GT3076R" with a T04S compressor housing on it , just to make sure that it has the GT37 compressor wheel in it .

I'd want the HTA wheel if I was running that housing or something that performed similar to it .

Does anyone know if Tao at Hypergear is doing cold side upgrades to GT30 turbos ? I'll ask this in their thread too .

  • 1 month later...

Standard re built S1 rb25, pon cams, ex cam gear +8, walbro 460 highflow standard side feeds 740cc, power Fc, hks gtrs kit, blitz fmic, gtr itbs etc etc

United E85

Royal Purple 10w40

Street driven soon to be tracked

303wkw @ 20psi

Massive boost leaks and 4psi back pressure at 20psi at O2 sensor port and clutch issues... All to be sorted next weeks and a retune with new eboost2 controller

I don't think you know what unopened means bro

I know what unopened means 'Bro'....... hahaha i read the title and my head automatically interpreted it as 'standard bottom end' lol

anyway whatever haha we all make mistakes :P

Edited by LaurelPWR

Still good power out of a gtrs. Lag must be non existent almost

Nah man its a little lagy hey....... as i said earlier, tons of boost leaks and some other issues haha soon to be all fixed :D

check it - http://www.skylinesaustralia.com/forums/topic/441053-should-my-hks-gt-rs-be-making-boost-earlier-e85/

I know what unopened means 'Bro'....... hahaha i read the title and my head automatically interpreted it as 'standard bottom end' lol

anyway whatever haha we all make mistakes :P

relax man just having a stab. Those results seem pretty good for a gtrs on 20psi with a whole heap of boost leaks to the point where it feels laggy. I wonder how much the cams helped that figure. Also do you have vct? Might be a factor in the laginess you're experiencing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...