Jump to content
SAU Community

Recommended Posts

That was on E85. Neo engine's pretty good, didn't have issues taking boost, and I didn't experience valve floating issues either. The external gate is welded to factory exhaust manifold, search the index page on my thread, there are few pages explaining how.

I run 98ron as the car can sit for months at a time. I dnt mind e85 but will wait until the new engine is run in.

You have the fuels all backwards, it's the 98 I wouldn't leave for months as it goes stale and detonates. Ethanol has no problem with sitting for a few months in a sealed container or tank.

E85 draws in moisture from the air. Thats what stuffs everything.

Hence why I said sealed container. How much water do you think it will suck in through a wall of steel or plastic?

I have had none of the issues you have described, actually I have had no issues at all in 5+ years running e85.

  • Like 2

I had some ethanol stored in a plastic container for about 6months , opened several times to mix with some 98 and I found that it had turnt cloudy, I'm guessing it must of absorbed moisture from the air or maybe there was moisture in the 98 it was mixed with?

Edited by AngryRB

Go back to p1

People said that about this club

And their predictions are becoming truer and truer with each 100kw.

Reminds me of a saying - There's old motorcyclists and there's bold motorcyclists, but there are no old bold motorcyclists!!!

Also found this on another website:

Coulson, Richardson & Sinnott report that:

  • aluminium, aluminium bronze, brass, copper, gunmetal and bronze, high Si iron, nickel, nickle-copper alloys, platinum, silver, stainless steel (18/8, molybedenum & austenitic ferric), titanium, tantalum, and zirconium
  • nylon 66 fibre & plastics, PCTFE, PTFE, polypropylene, and furane resin
  • hard rubber, neophrene, nitrile rubber, chlorosulphinated polyethylene, and silicone rubbers
  • concrete, glass, graphite, porcelain and stoneware, and vitreous enamel

are corrosion resistant to alcohols, beer & water up to 100C.

  • lead, mild steel (BSS 15), cast iron, and tin
  • acrylic sheet (eg perspex), acrylonitrile butadiene styrene resins, rigid unplasticised PVC, plasticised PVC, polyethylene (low & high density), polystyrene, melamine resins, epoxy resin, phenol formaldehyde resins, polyester resins
  • butyl rubber & halo-butyl rubber, ethylene propylene rubber, soft natural rubber, and polyethylene rubber
  • wood

So I'm drinking my beer out of glasses...........

Ive had e85 in those plastic jerrys for 6months and had no issues used it in the car after that, have also left e85 in metal jerrys outside in the rain in winter for few months again used the fuel and no problems.

  • Like 1

Ethanol is highly hygroscopic, yet all that means is it will absorb water out of the air until it's so saturated you get phase separation. However, if air can't get to it then it can't get water out of the air. Depending on tank breathers and such will determine if fresh air can get into a fuel tank Easyer enough to cause an issue. On most cars not so much. In sealed containers not at all.Also some company's have additives in fuels to help with it. Basically unless you fuel system has leaks ( that's a big problem) then you shouldn't really have issues except for really long term. I've had some issues with a tank that was about 1/4 full and sat for 6 months yet the fuel cap also wasn't on properly.

Oil contamination can be an issue though. Expecially with how open to air some motor can cases are. Yet if you use the right oil for it. Or change it out more often again not an issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
×
×
  • Create New...