Jump to content
SAU Community

Recommended Posts

Yep, me too. Only motul fluid i use is their RBF600 Brake fluid. Have had no issues with that whatsoever.

Their oils on the other hand, cost me a couple of lifters in my 25, and also caused issues in my S14. Changed oils (And replaced lifters) and all was fine.

My tuner used to stock motul, and had quite a few problems, and now he himself stocks and uses nulon. He also Carries ULX oils.

Was Motul Turbolight 4100 10w40 in my sr, and motel 300v chrono 10w40 in my 33/rb25.

Switched to penrite in the s14 and put in new lifters and changed to nulon in the 33 and all was good.

I thought there may have been an underlying issue with the lifters in the 33, but the problem started from that oil change. Tuner said he had had the same issues with a couple of 33's he tunes/looks after.

In my case it was turbolight but I don't think it's fair to say that was what spun the bearing. It was a 200,000+ km motor running 300rwkw and was a track car of some sort in JP.

However the as soon as I changed from shockproof to motul for the gearbox it became a bag of dicks overnight and lost 5th. All gears started to crunch a little and generally felt less tight.

The diff always worked but a few runs on the skidpan was enough to kill the diff fluid. It would make a lit of weird ticking noises after a few runs and would never return until a fluid change

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

Never had issues with shockproof, but have not used it in freshly rebuilt boxes. When I put my OS gears in I won't be using it.

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

Isn't it funny how views over 10 years change.

Ugggh I run Motul Htech 100 in my 33... and I've got lifter tick by the sounds of it.I used to run Penrite racing 10 10ths (10w/40) then JustJap recommended the Motul..

Looks like I'll be changing oils sooner rather than later.

Ugggh I run Motul Htech 100 in my 33... and I've got lifter tick by the sounds of it.I used to run Penrite racing 10 10ths (10w/40) then JustJap recommended the Motul..

Looks like I'll be changing oils sooner rather than later.

The precise symptoms I was talking about. My 33, and a couple of other customers had the same issues after using motul. Not sure why.

Penrite Racing 10, 10w40, just changed mine at roughly 7000km while car is off the road and has been going well in the 33 gtr, no problems experienced. Other people use HPR 10w50 with the added zinc and rate it well also for an engine that has done a fair amount of km's.

Refreshed a gearbox from a 33 gtr recently also. Cost of new bearings, synchros is fairly cheap from Japan, just take a few weeks to get all the parts. Longer if have to order more parts during the refresh. If you pay someone to do it and provide all the parts it's not that much in labour. Compared to having a crunching gearbox that is crap to drive I know what I'd take.

Once refreshed of course the gearbox feels brand new basically, worth the money. If you are not hard on boxes, the refresh will likely last for a long time.

Never used Redline oils in the gearbox and probably never will.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I left the ceramic coating off this bit, hopefully it just comes off after a few drives.   The gap between the spokes is too tight for anything on a stick, its only marginally bigger than my finger. I have to use a brush to get in there and its a big reason why I thought I'd try the coating.   Absolutely will do. I have EBC Blue Stuff pads to put on the front which will make them a bit dirtier. I'm hoping a pressure wash will just get most off. The shine is different to most, its very thin but seems very well 'attached' so hopefully it lasts.   
    • Barrels don't need to be shiny clean. But they are certainly nicer when they are not polluted with years of brake dust, and worse the rotting corpses of the last 17 balance weight sticky pads scattered all around.
    • Yeah, type a special character like ^ or | to initiate the equivalent of the "at"ing for thread links. Although, it might not get any easier to manage. Imagine 30 or 40 threads that kinda match what you want, and the one you want is lost after a long list of useless ones. The magic keyword version I proposed would be a manual effort to set up each case. More of a directed effort from the greybeards to facilitate exposure of useful content. I'm not against the auto complete stuff being considered - maybe por que no los dos? (And where I said "triggered automatically" in my OP, I meant "triggered accidentally". Of course I want it to be automatic!!)
    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
×
×
  • Create New...