Jump to content
SAU Community

Recommended Posts

Hi all,

Was hoping for some advice, just lost my ceramic turbine out the exhaust of my stock Series 2 R33 with the RB25DET and who should I get it repaired by, or should I just replace it?

Only got a stock motor with high kays on it... (270k), standard in guard I/C, standard ECU and about 10psi.

Suppose, I must have either hit more boost than that a few times for it to let go, that or I had a bearing let go.

Either way the turbine wheel has gone now and the car lost a lot of power (no really! lol) and the rear seal was weeping a little oil so I had a smoke screen following me at any rev above idle.

Got the car home, without upsetting too many people but I need my daily driver back!

Not interested in rebuilding the motor on this car or making it a high power, just need it back without too many hassles now or in the future. Really want bolt on and am happy to do a bit of work to get it done.

Who can overhaul?

Can I send it somewhere and get a standard overhauled turbo sent to me?

Can I buy a new spool assembly and bolt my bits on them?

What is the most cost effective?

Where do I buy?

Probably don't want to spend heaps but I don't want to buy cheap shit either, will possibly park the car or move it on soon.

Any ideas, who can help me please? Need the car back on the road asap.

I am in Geelong, Victoria not that this will make much difference!

Thanks in advance for any advice.

Stephen

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Thanks Artz... very much appreciated. Lots to read on that link. lol

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

with 270k on it, i would source another stock one and fit that. a high flow will kill your motor fast

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

think I will chance it and go stock.. if I can find one cheap enough.

wish the car was newish like 12 years ago when I bought it.

nothing like the choices to modify back then, unless you spent up big.

thanks everyone...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

Very true, however I think I know why this one let go... so I don't plan on letting that happen again.

Besides, don't go looking for R32 turbos. Try to find as late an R33 one as you can, or an R34 one if possible. Newer, less miles. Also less stress in your application (ie they can be boosted higher before failing when used on an R32, so at standardish boost should last well).

The best option would still be high flowing the stock turbo if you are keeping the car. as most of 2nd hand turbos are at their last legs either way. We replace not just larger steel wheels, but the complete CHRA, its more of getting a brand new turbo back in stock housings.

You do not need to replace the turbo again on engine change or rebuild, it can produce lot more power with better relaibility then stock turbo once upgrades are installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...