Jump to content
SAU Community

Recommended Posts

Hi all,

Was hoping for some advice, just lost my ceramic turbine out the exhaust of my stock Series 2 R33 with the RB25DET and who should I get it repaired by, or should I just replace it?

Only got a stock motor with high kays on it... (270k), standard in guard I/C, standard ECU and about 10psi.

Suppose, I must have either hit more boost than that a few times for it to let go, that or I had a bearing let go.

Either way the turbine wheel has gone now and the car lost a lot of power (no really! lol) and the rear seal was weeping a little oil so I had a smoke screen following me at any rev above idle.

Got the car home, without upsetting too many people but I need my daily driver back!

Not interested in rebuilding the motor on this car or making it a high power, just need it back without too many hassles now or in the future. Really want bolt on and am happy to do a bit of work to get it done.

Who can overhaul?

Can I send it somewhere and get a standard overhauled turbo sent to me?

Can I buy a new spool assembly and bolt my bits on them?

What is the most cost effective?

Where do I buy?

Probably don't want to spend heaps but I don't want to buy cheap shit either, will possibly park the car or move it on soon.

Any ideas, who can help me please? Need the car back on the road asap.

I am in Geelong, Victoria not that this will make much difference!

Thanks in advance for any advice.

Stephen

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Thanks Artz... very much appreciated. Lots to read on that link. lol

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

with 270k on it, i would source another stock one and fit that. a high flow will kill your motor fast

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

think I will chance it and go stock.. if I can find one cheap enough.

wish the car was newish like 12 years ago when I bought it.

nothing like the choices to modify back then, unless you spent up big.

thanks everyone...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

Very true, however I think I know why this one let go... so I don't plan on letting that happen again.

Besides, don't go looking for R32 turbos. Try to find as late an R33 one as you can, or an R34 one if possible. Newer, less miles. Also less stress in your application (ie they can be boosted higher before failing when used on an R32, so at standardish boost should last well).

The best option would still be high flowing the stock turbo if you are keeping the car. as most of 2nd hand turbos are at their last legs either way. We replace not just larger steel wheels, but the complete CHRA, its more of getting a brand new turbo back in stock housings.

You do not need to replace the turbo again on engine change or rebuild, it can produce lot more power with better relaibility then stock turbo once upgrades are installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...