Jump to content
SAU Community

Recommended Posts

This hasn't been updated lately, but as it stands at the moment the fastest is a 260rs with a 12.3 then Darren spencer's rs with 13.01 then my 260 with a 13.2

The fastest so far in here is 11.3...hasn't be updated for a long time

According to my Google search, a S2 C34 with RB25DET came with 173Kw at the engine. 12 years later it has 155awKw - only 18Kw loss thru the drivetrain. Is that possible, even with a manual transmission? I suspect some Walt Disney optimism at play, lol.

Nice car tho. I like them in yellow.

S2 c34 had the rb25detNEO, so 206kw from the factory.

Most stock stags lay down around the 135-150kw depending on manual/auto awkw/rwkw.

1996 s1 with a manual and a neo engine conversion.nistune, 3076r, poncams etc etc e85. just need to sort out the old girl so she holds boost, new waste spring and clean up tune under the curve and should be even better but already she is fun shopping wagon.

post-76904-0-37625900-1353412131_thumb.jpg

  • 2 weeks later...

Sydney Motor Sport Park - South Circuit.

1:14.77 - (34*C with stock brakes and hawk ceramic pads - also overheating) lol

was good fun but took it easy on the brakes could only do 2 lap sprints before i needed to do a cool down lap as i could smell the brakes HAHA

and definately need some semi slicks rather than the federal 595's!!!

then i'd feel much more confident in the car but i learnt alot and the car handled beautifully otherwise!!!

  • 3 weeks later...

this thread needs a update

1998 Stagea 260RS

407.4 HP (303KW) @ 20PSI on caltex 98 safe daily driver tune

post-86035-0-99721900-1356010495_thumb.jpg

Congrats excellent job but she is fun to drive .

And yes this thread really needs an update lol...

Congrats excellent job but she is fun to drive .

And yes this thread really needs an update lol...

Thanks mate, it definately starts to come alive with 300kw! The 4wd is starting to work a bit harder now.

When is ur's going back in for a touch up?

When i get off my butt . Bit busy with our new baby. Got to change waste gate spring and sort the boost controler out get it to hold stable then turn it up to around 20 ish psi. Also got water/meth injection to hook up basicially to lowr exhaust temps should be interesting to see what she make. Dont think my gear box is going to like it hmmm

  • 2 weeks later...

this thread needs a update

1998 Stagea 260RS

407.4 HP (303KW) @ 20PSI on caltex 98 safe daily driver tune

post-86035-0-99721900-1356010495_thumb.jpg

We really really need some "more" m35s to make some power then this thread might get updated lol....... oh no did i just say that

OK, updated doc sent to mods for updating the 1st page.

some of the figures (power) weren't high enough to bump the next person off.

Remember - keep posting in here, so its easy to update when I CBF.

  • 2 years later...
  • 3 weeks later...

Well finally got round to re tuning stagea after all these years ( to busy working on customers cars ) ( and the shops s15)

Old tune 338rwkw 311awkw at 19 psi

New tune 360-370rwkw 340.1 awkw

Still the same standard neo bottom end and small 3076.63 all standard manifolds and return flow cooler , video is of Chris and my self doing a 3rd gear pull 335 awkw 4th gear is 340 awkw @27psi

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
    • Hell, I know that much. So far I just put it off as "part of the deal".
    • I removed the head expecting to find broken and bent valves, but instead found number 1 at TDC and cylinder 2 at the top of its cylinder stroke as well, thought that was weird and proceeded to push cylinder 2 back down until it either bottomed out on its other piston half or the conrod either way we found the issue kind of,  now to remove the engine and see how the block looks, hopefully its just the top off a piston.  
    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
×
×
  • Create New...