Jump to content
SAU Community

Recommended Posts

Hi fellas,

I recently came across an opportunity to buy off a mate a set of black Volk TE37's in 19x9.5+12 all round and plan to run on 275/30/19 tires.

I have heard contrasting views, some saying this offset looks best whereas some suggest 19x10.5+22 is the better, but various people seem to run the 19x9.5+12 more frequent. Can someone please share with me their experiences on a R33 GTR and best tire profile as noticed chunkier profiles look best on a R33 GTR.

It looks good on his R34 GTR, but not sure it will look good on my fatter R33? Just don't want to buy them and regret it!! Please help!! They seem to look ok on 350Z's??

Pictures would be great!!

Thanks.

SM

volk-racing-te37-wheels-19x95-and-larger-vrte37.jpg

Picture020_resize.jpg

Link to comment
https://www.sau.com.au/forums/topic/389732-best-te37-19-offset-for-a-r33-gtr/
Share on other sites

R33/34 GTR.

19x10.5 +15 or + 12.

Other sizes will work. But size above in 18/19 is best IMO.

Will fill guards the most.

X9.5 +10-20 works as well but will sit in the guards. Noticeably.

best offset would be +12 or +15 but then again that all depends on the size available to you.

i wouldnt go for the 9.5 even tho they do have good offset. id hold out out for atleast 10" wide with the same offset. would look that little bit more aggressive

best offset would be +12 or +15 but then again that all depends on the size available to you.

i wouldnt go for the 9.5 even tho they do have good offset. id hold out out for atleast 10" wide with the same offset. would look that little bit more aggressive

Thanks mate for the advice. If I were to go for the +9.5, would it still look ok?

Cheers

you could always just put some spacers behind them to push them out that bit more if you are realy worried about it.

if you used say a 12mm spacer that would basically make them 10" wide.

ive only ever had 10.5" wide on my gtr with the 3 sets of rims ive owned so i cant give personal advice on how it would look

you could always just put some spacers behind them to push them out that bit more if you are realy worried about it.

if you used say a 12mm spacer that would basically make them 10" wide.

ive only ever had 10.5" wide on my gtr with the 3 sets of rims ive owned so i cant give personal advice on how it would look

So you think 19x9.5+12 with custom 12mm spacer plates would look tough as 19.10.5+12? surely with spacers, it would look just as tough as x10.5 in terms of width, right mate?

Thanks all.

Hi fellas,

I recently came across an opportunity to buy off a mate a set of black Volk TE37's in 19x9.5+12 all round and plan to run on 275/30/19 tires.

I have heard contrasting views, some saying this offset looks best whereas some suggest 19x10.5+22 is the better, but various people seem to run the 19x9.5+12 more frequent. Can someone please share with me their experiences on a R33 GTR and best tire profile as noticed chunkier profiles look best on a R33 GTR.

19 x 9.5 +12 will just give you more lip and a tad more concave on the spokes, which will give a more aggressive look on you wheels.

19 x 10.5 +22 will give you better rear traction due to it being a inch wider of tyre but a less aggressive offset.

R33 GTR's have wide rear guards, preferably you run 19 x 10.5 +12 as the stock R33 GTR wheels are 17 x 9 +30 and the look tiny.

But if you got 19 x 10.5 +22, it should still look ok but won't fill out the guards as good as 19 x 10.5 +12.

PCd-skyline-005.jpg

19 x 9.5 +12

4.jpg

Picture134.jpg

19 x 10.5 +12 fills out the guards nicely.

Don't bother running spacers and get the correct offset to fill out the guards.

19 x 9.5 +12 will just give you more lip and a tad more concave on the spokes, which will give a more aggressive look on you wheels.

19 x 10.5 +22 will give you better rear traction due to it being a inch wider of tyre but a less aggressive offset.

R33 GTR's have wide rear guards, preferably you run 19 x 10.5 +12 as the stock R33 GTR wheels are 17 x 9 +30 and the look tiny.

But if you got 19 x 10.5 +22, it should still look ok but won't fill out the guards as good as 19 x 10.5 +12.

PCd-skyline-005.jpg

19 x 9.5 +12

4.jpg

Picture134.jpg

19 x 10.5 +12 fills out the guards nicely.

Don't bother running spacers and get the correct offset to fill out the guards.

Thanks for bro...muchly appreciated!!

Cheers

  • 4 months later...

Is it possible to fit 19x11 +5 with 275/30/19 tires all around on a R33GTR with coil overs and standard brembo brakes, the wheels in mind are work Miester S1-3 with r type disk.

What offset is the above GTR running the car in question is the only GTR with miesters on it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha ha ha! I know those feels mate I've finally got the garage cleared enough that next weekend I'll do some actual work on my car (hopefully). Unfortunately garage isn't usable after 10am at the moment That said, I've done a lot of work this weekend on helping finalise a friend's Production Race car. Full started Christmas Eve. We're down to about 8 tasks on the list, including "get a wheel alignment". Sometimes it's just easier working on someone else's car or project than our own stuff 😛
    • Ha ha, ended up going it alone.  I just sent it (in a very nervous fashion).  Once I'd released the locks and it didn't automatically start spinning out of control i felt a bit more confident.   It made some loud sounds (cracking and creaking noises) when I first spun it which got the heart rate going again!  I couldn't bring myself to leave it tipped on the side.  I feel a bit more comfortable having back right side up while it sits there. I'd get angry with your last point but you're 100% correct! 😅 Even yesterday I managed to distract myself at numerous times to make a bracket to fit an LED flood light off the back of the house and fix my sons pushbike.  There were other little taks nibbling at my brain for the rest of the day too...
    • Probably one of the more nerve wracking experiences of my entire life! 😂😂 The balance (centre of gravity) is out still but in a direction that gives me comfort!   It's quite bottom heavy still meaning it takes a bit of muscle to rotate it.  The plus side of that is that it wants to to go back to upright.  Better that than wanting to go all stranded turtle on me!
    • hmmm that's not ideal. This is a pretty new engine right, will be interesting if your engine guy has any theories about causes
    • A universal ball joint removal c press kit is better money spent and will work for the Hicas ball joints.  Here's a 45$ CAD Example. ATPEAM Heavy Duty Ball Joint Press Kit with 4WD Adapters | Professional 4 in 1 Ball Joint Press Removal and Installation Tool for Cars and Trucks | Universal Ball Joint Tool with Storage Case, Ball Joint & Tie Rod Tools - Amazon Canada
×
×
  • Create New...